| 微结构聚合物光纤套管法拉丝工艺 |
| |
| 引用本文： | 张亚妮,刘飞,许强,王润轩.微结构聚合物光纤套管法拉丝工艺[J].四川激光,2011(1):37-39. |
| |
| 作者姓名： | 张亚妮 刘飞 许强 王润轩 |
| |
| 作者单位： | 宝鸡文理学院物理与信息技术系;中国科学院西安光学精密机械研究所瞬态光学与光子技术国家重点实验室; |
| |
| 基金项目： | 中国博士后科学基金(20080431258); 瞬态光学与光子技术国家重点实验室开放基金(SKLST200913); 宝鸡文理学院重点科研项目(ZK0841,ZK0916,ZK0814) |
| |
| 摘 要： | 通过对微结构聚合物光纤拉丝工艺的研究,提出微结构聚合物光纤二次预制棒套管拉丝技术.为了降低光纤拉伸过程中微孔坍塌率,从光纤拉伸力和材料表面张力之间平衡的角度考虑,对拉丝炉中热区温度和长度进行控制,得到了预制棒拉丝炉和光纤拉丝炉中热区温度分布曲线.最后,通过对本体聚合法制备的椭圆芯六角对称微结构聚合物光纤预制棒的拉丝实践...
|
| 关 键 词： | 导波与光纤光学 微结构光纤 套管拉丝 聚合物 |
Technology of microstructured polymer optical fiber sleeved drawing processing |
| |
| ZHANG Ya- ni,LIU Fei,XU Qiang,WANG Run - xuan.Technology of microstructured polymer optical fiber sleeved drawing processing[J].Laser Journal,2011(1):37-39. |
| |
| Authors: | ZHANG Ya- ni LIU Fei XU Qiang WANG Run - xuan |
| |
| Affiliation: | ZHANG Ya- ni~(1,2),LIU Fei~1,XU Qiang~1,WANG Run - xuan~1 (1.Department of Physics and Information Technology,Baoji College of Arts and Science,Baoji,Shanxi 721007,China,2.State Key Laboratory of Transient Optics and Photonics,Xi'an Institute of Optics and Precision Mechanics,Chinese Academy of Sciences,Xi'an,shanxi 710119,China) |
| |
| Abstract: | A methodology is presented suitable for the fabrication of a wide range of microstructured polymer optical fiber(mPOF) by discussing drawing technique of mPOF,that the key technology to fabricate good mPOF is a secondary perform sleeved drawing processing.The temperature distributing of the hot -zone for the drawing oven of perform and fiber is shown by controlling over the length and temperature of the hot - zone while maintaining fiber drawing tension high enough to ensure an acceptable level of partial h... |
| |
| Keywords: | guided wave and fiber optics microstructured optical fiber sleeved drawing processing polymer |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
