首页 | 本学科首页   官方微博 | 高级检索  
     

多孔Fe_2O_3/Al复合含能材料的制备与表征
引用本文:周超,李国平,罗运军.多孔Fe_2O_3/Al复合含能材料的制备与表征[J].火炸药学报,2010,33(5).
作者姓名:周超  李国平  罗运军
作者单位:北京理工大学材料学院,北京,100081
基金项目:国家自然科学基金项目(10876004); 总装重点预研基金项目(9140a28020309BQ01)
摘    要:用溶胶-凝胶法结合超临界干燥法,制备了Fe2O3/Al复合含能材料。用SEM、XRD、BET等方法对Fe2O3/Al复合含能材料的结构进行了表征。结果表明,超临界法制备的Fe2O3/Al复合含能材料呈明显的纤维网络状结构;其中Al的平均粒径为40nm;比表面积为147.9m2/g,相比空白Fe2O3气凝胶明显下降,平均孔径为8nm,孔径分布比较均匀。

关 键 词:材料科学  溶胶-凝胶法  Fe2O3/Al复合含能材料  纳米铝粉  

Preparation and Characterization of Porous Fe_2O_3/Al Composite Energetic Material
ZHOU Chao,LI Guo-ping,LUO Yun-jun.Preparation and Characterization of Porous Fe_2O_3/Al Composite Energetic Material[J].Chinese Journal of Explosives & Propellants,2010,33(5).
Authors:ZHOU Chao  LI Guo-ping  LUO Yun-jun
Affiliation:ZHOU Chao,LI Guo-ping,LUO Yun-jun(College of Material Science,Beijing Institute of Technology,Beijing 100081,China)
Abstract:Fe2O3/Al composite energetic material was prepared by sol-gel method and supercritical fluid drying.Its structure was investigated by means of SEM,XRD and BET.The experimental results showed the structure of Fe2O3/Al composite energetic material was significant fiber network.The average particle size of Al in Fe2O3/Al composite energetic material was 40nm.The specific surface area of Fe2O3/Al composite energetic material was 147.9m2/g,and much smaller than blank Fe2O3 aerogel.Its average pore size was 8nm a...
Keywords:material science  sol-gel method  Fe2O3/Al composite energetic material  nano-Al  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号