首页 | 本学科首页   官方微博 | 高级检索  
     

10MW高温气冷实验堆(HTR-10)燃耗测量系统控制方案的改进
引用本文:马涛,胡守印.10MW高温气冷实验堆(HTR-10)燃耗测量系统控制方案的改进[J].高技术通讯,2007,17(7):719-723.
作者姓名:马涛  胡守印
作者单位:清华大学核能与新能源技术研究院,北京,100084
基金项目:国家高技术研究发展计划(863计划)
摘    要:基于10MW高温气冷实验堆(HTR-10)的FCA系统及CFC系统的设计原理及运行规程,在不改变FCA系统原有设备部件的前提下,对FCA系统运行逻辑关系进行了优化,改进了原燃耗测量程序,实现了燃耗测量过程的自动运行及测量结果的自动建库.在此基础上,设计了CFC系统与FCA系统PLC的通信协议,实现了燃耗测量流程与控制系统的实时数据通信.上述改进的结果使得燃料装卸流程不再需要另设运行班组,提高了效率,将人为操作的步骤最少化,降低了误操作的可能性.

关 键 词:10MW高温气冷实验堆(HTR-10)  燃耗测量  铯137  C200HS可编程逻辑控制器  232串行端口
收稿时间:2006-06-19
修稿时间:2006年6月19日

Improvement on the control scheme of burn-up measurement system of HTR-10
Ma Tao,Hu Shouyin.Improvement on the control scheme of burn-up measurement system of HTR-10[J].High Technology Letters,2007,17(7):719-723.
Authors:Ma Tao  Hu Shouyin
Affiliation:Institute of Nuclear and New Energy Technology Tsinghua University, Beijing 100084
Abstract:Based on the design principle and operation regulations of FCA and CFC, without replacement of original equipments and components of FCA, optimizations were made to operational logical relations of FCA and modifications were made to original burn-up measurement procedure. The communication protocol between CFC and PLC of FCA and the real-time communication were implemented. As the result of modification, it is unnecessary to arrange operational teams specially for burn-up measurement and the efficiency was raised. The manual operational procedure were limited to minimum and the possibility of mishandling was reduced.
Keywords:HTR-10  bum-up level measurement  ^137Cs  C200HS PLC  RS-232C
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号