Stress biaxiality in high-burnup PWR fuel cladding under reactivity-initiated accident conditions |
| |
Authors: | Yutaka Udagawa Tomoyuki Sugiyama Motoe Suzuki Fumihisa Nagase |
| |
Affiliation: | Japan Atomic Energy Agency , Ibaraki , Japan |
| |
Abstract: | In order to promote a better understanding of failure mechanisms of high-burnup pressurized water reactor (PWR) fuels under reactivity-initiated accident (RIA) conditions, stress biaxiality in cladding has been estimated for the pellet-cladding (PC) mechanical interaction (PCMI) phase. The estimation was based on an analysis of the transient elongations of a pellet stack and a cladding tube measured in RIA-simulating experiments in the nuclear safety research reactor (NSRR) using the RANNS code. Stress biaxiality in the high-burnup PWR fuel cladding during the PCMI phase has been estimated to be 0.7–0.8, on average, at the mid-wall of the cladding. A comparison with fresh fuel test results and a sensitivity analysis showed that the effects of burnup and pulse width on cladding stress biaxiality are less than 10% for the investigated range. The present analysis also indicated that PC friction is strong, and that the cladding constraint on pellet stack elongation is significant irrespective of burnup. Therefore, it is recommended that strong PC friction be assumed, which is similar to the mechanical bonding condition, and that fuel pellets be treated as deformable materials in models of fuel behavior during the PCMI phase. |
| |
Keywords: | PWR-type reactors Zircaloy cladding fuel rod elongation stress biaxiality RIA NSRR |
|
|