|
|||||
|
|
| 炭纤维表面处理对CF／PMR—15复合材料力学性能的影响 | |
| 引用本文： | 孙琼,黄玉东,陆玉峻,李平,ZHANG Rui,ZHOU Dong-mei.炭纤维表面处理对CF／PMR—15复合材料力学性能的影响[J].炭素,2001(1):22-24. |
| 作者姓名： | 孙琼 黄玉东 陆玉峻 李平 ZHANG Rui ZHOU Dong-mei |
| 作者单位： | 1. 哈尔滨电炭研究所, 2. 哈尔滨工业大学, 3. Harbin Electrical Carbon Research Institute, |
| 摘 要： | 研究了炭纤维表面不同处理方法对复合材料力学性能的影响，采用等离子体和等离子体接枝技术对炭纤维表面进行处理后，CF／PMR－15复合材料的界面剪切强度与层间剪切强度均有所提高，随着界面状态的改善，界面剪切强度提高的幅度比层间剪切强度提高的大，本文为指导炭纤维的表面处理，评价处理效果，进一步预报复合材料的宏观性能打下了基础。 |
| 关 键 词： | 炭纤维 表面处理 等离子体 复合材料 CF／PMR－15 力学性能 |
| 文章编号： | 1001-8948(2001)01-0022-03 |
| 修稿时间： | 2000年10月30 |
INFLUENCE OF CARBON FIBER SURFACE TREATMENT ON MECHANICAL PROPERTIES OF CF/PMR-15 COMPOSITES |
|
| SUN Qiong,HUANG Yu-dong,LU Yu-jun,Li pin,ZHANG Rui,ZHOU Dong-mei.INFLUENCE OF CARBON FIBER SURFACE TREATMENT ON MECHANICAL PROPERTIES OF CF/PMR-15 COMPOSITES[J].Carbon,2001(1):22-24. | |
| Authors: | SUN Qiong HUANG Yu-dong LU Yu-jun Li pin ZHANG Rui ZHOU Dong-mei |
| Abstract: | The influence of carbon fiber surface treatment on the mechanical Properties of CF/PMR - 15 composites is dicussed.After carbon fiber Surface was heated with plasma and plasma grafting technique,the interfacial shear strength (IFSS)and interlaminar shear strength(ILSS)of CF/PMR - 15 composites are all increased. With improvement of interface properties,there is a bigger increase in IFSS than in ILSS. This has laid foundations for directing carbon fiber surface treatment, evaluating treatment effect and predicting general properties of composites. |
| Keywords: | carbon giber surface treatment plasma composites |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |