| 金刚石六面顶压机铰链梁的结构优化设计 |
| |
| 引用本文： | 秦东晨,陈江义,梁颖,秦晓明.金刚石六面顶压机铰链梁的结构优化设计[J].金刚石与磨料磨具工程,2005,2(5):70-72. |
| |
| 作者姓名： | 秦东晨 陈江义 梁颖 秦晓明 |
| |
| 作者单位： | 1. 郑州大学机械工程学院,郑州,450002
2. 焦作师范高等专科学校,焦作,454100 |
| |
| 基金项目： | 河南省科技攻关项目(20001110106) |
| |
| 摘 要： | 本文以有限无法作为结构分析手段，采用敏度分析技术，在考虑疲劳强度的条件下，完成了铰链梁的结构优化设计，为金刚石六面顶压机关键零部件的设计提供了一套较为完整的设计方法和设计系统。利用ANSYS的APDL参数化语言，编制了铰链梁的结构优化设计程序ODPST，采用零阶优化方法进行了铰链梁的结构优化设计，得到了精确可靠的设计参数，有效地提离了铰链梁的抗疲劳性能和强度。
|
| 关 键 词： | 铰链梁 结构优化设计 有限元分析 敏度分析 |
| 文章编号： | 1006-852X(2005)05-0070-03 |
| 修稿时间： | 2005年6月18日 |
Structural optimal design for hinge sleeve of cubic press |
| |
| Qin Dongchen,Chen Jiangyi,Liang Ying,Qin Xiaoming.Structural optimal design for hinge sleeve of cubic press[J].Diamond & Abrasives Engineering,2005,2(5):70-72. |
| |
| Authors: | Qin Dongchen Chen Jiangyi Liang Ying Qin Xiaoming |
| |
| Affiliation: | Qin Dong-chen~1 Chen Jiangyi~1 Liang Ying~1 Qin Xiaoming~2 |
| |
| Abstract: | By means of the structural analysis and taking into account of the fatigue intensity,the structural optimal design of the hinge sleeve of cubic press were conducted based on the sensitivity analysis technology.A comparatively complete design method and system for the key parts of the diamond synthesising cubic press realized.Using the APDL language of ANSYS,the structural optimal design program ODPST is programmed.Taking the C0(0-step) method,the accurate and reliable design parameter can be obtained.This improves the fatigue intensity of the hinge sleeve effectively.In the optimization process,the sensitivity analysis technology is used to improve the calculation efficiency. |
| |
| Keywords: | hinge sleeve structural optimal design finite element analysis sensitivity analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
