| 烧结机压料装置中轴压厚壁圆筒有限元分析 |
| |
| 引用本文： | 刘海生,郭子利,王会刚.烧结机压料装置中轴压厚壁圆筒有限元分析[J].机械设计与制造,2009(7). |
| |
| 作者姓名： | 刘海生 郭子利 王会刚 |
| |
| 作者单位： | 唐山学院机电工程系,唐山,063000 |
| |
| 基金项目： | 唐山市机电一体化重点实验室基金资助，河北省教育厅项目基金资助 |
| |
| 摘 要： | 探讨了130m2烧结机压料装置中轴压厚壁圆筒的计算问题,提出了厚壁圆筒应按强度问题分析.利用ANSYS在载荷和内径不变的情况下对其进行有限元分析,从应力和位移两个角度综合讨论,得出应力分布不均匀使变形复杂,径向位移正负交加可使零件发生局部失稳,这两种情况均不利于零件的正常工作.得出壁厚为5mm圆筒最为合理这一结论.
|
| 关 键 词： | 烧结机压料装置 轴压厚壁圆筒 强度分析 有限元 |
FEM analysis of pressing material installment axial compressive loads cylinder of sintering machine |
| |
| LIU Hai-sheng,GUO Zi-li,WANG Hui-gang.FEM analysis of pressing material installment axial compressive loads cylinder of sintering machine[J].Machinery Design & Manufacture,2009(7). |
| |
| Authors: | LIU Hai-sheng GUO Zi-li WANG Hui-gang |
| |
| Affiliation: | Department of Mechanical Engineering;Tangshan College;Tangshan 063000;China |
| |
| Abstract: | Analysis of pressing material installment axial compressive loads cylinder of 130m2 sintering machine is completed and it is shown this problem should be analysis based on intensity.Stress and strain analysis is carried by using ANSYS based on FEM.It is concluded that the cylinder may be destroyed by local instability due to stress or displacement and 5mm wall cylinder is rational. |
| |
| Keywords: | Pressing material installment of sintering machine Axial pressure thick walled cylinder Intensity analysis FEM |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
