首页 | 本学科首页   官方微博 | 高级检索  
     

一种弱界面结合涂层面内抗拉强度测试方法
引用本文:弓满锋,隋广洲. 一种弱界面结合涂层面内抗拉强度测试方法[J]. 机械强度, 2012, 0(3): 338-341
作者姓名:弓满锋  隋广洲
作者单位:湛江师范学院机电工程研究所,湛江,524048
基金项目:国家自然科学基金,湛江师范学院自然科学博士启动项目,湛江市财政资金科技专项竞争性分配项目
摘    要:基于界面自由和均匀应变理论模型,推导出形式较为简单的弱界面结合涂层—基体系统应力和应变计算公式;通过实验进一步验证上述计算公式,公式可用于测试弱界面结合的涂层和基体系统的面内抗拉强度。结果证实:测试方法简单有效,实验测得60μm~250μm厚6%Y2O3-ZrO2涂层的面内抗拉强度值分布在323.5 MPa~376.2 MPa之间,且随着涂层厚度增加,涂层面内抗拉强度值小幅下降。

关 键 词:弱界面  涂层  面内抗拉强度

MEASUREMENT METHOD OF IN-PLANE TENSILE STRENGTH FOR WEAK-INTERFACE BONDING COATINGS
GONG ManFeng , SUI GuangZhou. MEASUREMENT METHOD OF IN-PLANE TENSILE STRENGTH FOR WEAK-INTERFACE BONDING COATINGS[J]. Journal of Mechanical Strength, 2012, 0(3): 338-341
Authors:GONG ManFeng    SUI GuangZhou
Affiliation:GONG ManFeng SUI GuangZhou (Institute of Mechatronic Engineering,Zhanjiang Normal University,Zhanjiang 52 4048,China)
Abstract:The simple stress and strain computational formulas were deduced for weak-inter face bonding coatings,based on the interface freedom and uniformity strain theo ry model.The stress and strain computational formulas were measured,which were devoted to work out the in-plane tensile strength of weak-interface bonding c oatings.These results indicated that the testing method was simple and effectiv e,the in-plane tensile strength of 6%Y2O3-ZrO2 coatings was about 3 23.5 MPa to 376.2 MPa when the coatings thickness were changed from 60 μm to 250 μm,and the in-plane tensile strength was decreased with increasing coatin gs thickness.
Keywords:Weak-interface  Coating  In-plane tensile strength
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号