Carbide grain growth in cemented carbides sintered with alternative binders

Cemented carbides are composites made of a hard refractory ceramic phase and a ductile binder, most commonly WC and Co, respectively. Since the use of cobalt in the hard metal industry is questioned by the new European regulation on chemicals, extensive research has been done to develop new grades based on a Co-Ni-Fe binder. With similar mechanical, physical properties and affinity to C and W, nickel and iron are the best candidates for an efficient binder in cemented carbides. As mechanical properties are strongly dependent on the materials microstructure, and especially on the WC grain size, understanding the effect of the binder on the final microstructure is crucial.In this work, the carbide grain growth behaviour of WC-M alloys (M = Co, Ni, Fe) with different carbon contents is discussed from qualitative and quantitative microstructural analyses. Whereas grain growth is more or less inhibited in WC-Fe alloys, increasing carbon content promotes grain growth in WC-Co and WC-Ni alloys, with a slight abnormal grain growth in case of Ni binder. Different mechanisms for grain growth are discussed, in relation with the observed morphology of WC grains after sintering.