Effects of fine WC particle size on the microstructure and mechanical properties of WC-8Co cemented carbides with dual-scale and dual-morphology WC grains

Dual-scale and dual-morphology WC grained WC-8Co cemented carbides comprising triangular or hexagonal fine WC grains and plate-like coarse WC grains were synthesized by vacuum sintering using Co, flaky graphite, WC, and coarse W as the starting materials. The effects of fine WC particle sizes on microstructure, relative densities, and mechanical properties of the dual-scale and dual-morphology WC grained cemented carbides were investigated. The results revealed that the growth of plate-like coarse WC grains was further promoted with the decrease in the particle size of the added fine WC; hence, their aspect ratio increased. In addition, added fine WC led to the separation of plate-like coarse WC grains so as to break their oriented arrangement and prevent their face contact; hence, plate-like coarse WC grains were completely covered by the Co binder phase. Moreover, the addition of smaller particle size of fine WC contributed to more uniform Co binder phase. When 0.4-μm WC powders was added, the aspect ratio of plate-like coarse WC grains was greater than that of plate-like WC grained cemented carbides without the addition of fine WC. The dual-scale and dual-morphology WC grained cemented carbides by adding 0.4-μm fine WC exhibited good comprehensive mechanical properties, with a transverse rupture strength of 3645 MPa, a Rockwell hardness of 91.5 HRA, and a fracture toughness of 12.3 MPa?m^1/2.