Near-surface phenomena occurring in cemented carbides with different binders during rotary-percussive drilling of reinforced concrete: FE simulation and microstructural investigations |
| |
Affiliation: | 1. Chair of Functional Materials, Department of Materials Science, Saarland University, Campus D 3.3, D-66123 Saarbrücken, Germany;2. CIEFMA - Department of Materials Science and Metallurgy, Barcelona East School of Engineering (EEBE), Universitat Politècnica de Catalunya - BarcelonaTech, E-08019 Barcelona, Spain;3. Material Engineering Center Saarland (MECS), D-66123 Saarbrücken, Germany;4. AB Sandvik Coromant R&D, Lerkrogsvägen 19, SE-126 80 Stockholm, Sweden;1. CIEFMA-Departament de Ciència dels Materials i Enginyeria Metal·lúrgica, EEBE, Universitat Politècnica de Catalunya, Barcelona, Spain;2. Barcelona Research Center in Multiscale Science and Engineering, Universitat Politècnica de Catalunya, Bsarcelona, Spain;3. Italian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA), Rome, Italy;4. Institute for Photonics and Nanotechnologies – CNR (National Research Council of Italy), Rome, Italy;5. Hyperion Materials & Technologies, Martorelles, Spain;1. University of Applied Sciences and Arts Western Switzerland, CH-1950 Sion, Switzerland;2. Hilti Corporation, 9494 Schaan, Liechtenstein |
| |
Abstract: | Rotary-percussive drilling through steel rebar in reinforced concrete subjects drill bits to intensive thermomechanical loading and wear. Significant microstructural changes occur in near-surface regions. These include, but are not limited to, micro- and mesoscopic cracking; fracture at WC-binder interfaces; WC comminution; partial WC dissolution and rearrangement; surface decarburization; binder depletion and pore formation; and the creation of secondary phases within the binder [1–4].Cemented carbide drill bits with three different binders (Co, CoNi and Ni) were drilled in steel reinforced concrete. After sectioning the drill bits, numerous analysis methods were employed to identify the type and composition of phases present; to characterize microstructural changes and wear phenomena; and to locally measure the properties of the modified surface microstructure. Noticeable differences between the binder types are evident.A variety of finite element (FE) simulation methods were used to describe the thermo-mechanical loading spectrum acting on the drill bits. Transient (dynamic) impact loading and quasi-static indentation simulations calculated the stresses and temperatures generated in the application. The magnitude, orientation vectors and spatial distribution of the simulated stress and temperature fields were correlated with the experimental findings regarding crack initiation sites and regions experiencing thermo-mechanically induced surface microstructural and compositional modification. This paper presents some of these findings from extensive experimental and simulation studies. |
| |
Keywords: | |
本文献已被 ScienceDirect 等数据库收录! |
|