| 三金潭污水处理厂配水、排泥系统设计特色 |
| |
| 引用本文： | 朱昱. 三金潭污水处理厂配水、排泥系统设计特色[J]. 中国给水排水, 2006, 22(12): 52-54 |
| |
| 作者姓名： | 朱昱 |
| |
| 作者单位： | 中国市政工程中南设计研究院,湖北,武汉,430010 |
| |
| 摘 要： | 为了解决三金潭污水处理厂的配水、排泥均匀性问题,在全厂总平面布局上系统地考虑了各处理构筑物的进水与排泥走向,设计采用自由出流矩形薄壁溢流堰进行各构筑物间的配水、排泥,使每组处理构筑物均能达到设计负荷并正常运行,确保出水水质达到国家标准.
|
| 关 键 词： | 配水排泥均匀性 自由出流矩形薄壁堰 周进周出二沉池 对称式双边配水 三井镶套式配水排泥井 |
| 文章编号： | 1000-4602（2006）12-0052-03 |
| 收稿时间： | 2006-02-27 |
| 修稿时间： | 2006-02-27 |
Design Characteristics of Influent Distribution and Sludge Discharge Systems in Sanjintan Sewage Treatment Plant |
| |
| ZHU Yu. Design Characteristics of Influent Distribution and Sludge Discharge Systems in Sanjintan Sewage Treatment Plant[J]. China Water & Wastewater, 2006, 22(12): 52-54 |
| |
| Authors: | ZHU Yu |
| |
| Abstract: | In order to obtain the uniform influent distribution and sludge discharge on Sanjintan Sewage Treatment Plant, the influent and discharged sludge of each treatment unit were considered systematically based on the general layout of the plant. Free-flow rectangular overflow weir was adopted in each treatment unit to distribute effluent and discharge sludge evenly, and also to meet the design load.Such a design can ensure the effluent quality satisfying the national standard. |
| |
| Keywords: | uniform influent distribution and sludge discharge free-flow rectangular overflow weir secondary sedimentation tank with peripheral inlet and outlet symmetric two-side water distil bution three embedded well for influent distribution and sludge discharge |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
