| pH和柠檬酸钠含量对变形锌合金镀镍层质量的影响 |
| |
| 引用本文： | 柯知勤,吴浩杰,宋振纶. pH和柠檬酸钠含量对变形锌合金镀镍层质量的影响[J]. 表面技术, 2010, 39(4): 18-20. DOI: 10.3969/j.issn.1001-3660.2010.04.006 |
| |
| 作者姓名： | 柯知勤 吴浩杰 宋振纶 |
| |
| 作者单位： | 中周科学院宁波材料技术与工程研究所,宁波,315201;中周科学院宁波材料技术与工程研究所,宁波,315201;中周科学院宁波材料技术与工程研究所,宁波,315201 |
| |
| 基金项目： | 国家科技支撑计划(2009BAE71B05); 宁波市重大科技计划(2008B10026) |
| |
| 摘 要： | 固定其它工艺参数,改变镀液pH值和柠檬酸钠含量对ZAT10变形锌合金进行电镀镍,通过金相显微镜、场发射扫描电镜(SEM-EDS)和超景深三维显微镜记录镀镍层的形貌,以镀液稳定性、镀层表观合格性和出现裂纹与否为依据,对整个实验区进行划分,获得了关于镀液pH值-镀液柠檬酸钠含量与镀液稳定性和镀层性能的关系示意图,并结合EDS分析镀层成分和涂膏法、热震试验分析镀层性能的结果,最终确定了示意图上镀液稳定、镀层质量好的区域。
|
| 关 键 词： | ZAT10变形锌合金 电镀镍 pH值 柠檬酸钠 |
| 修稿时间： | 2010-08-10 |
Influence of pH and Content of Sodium Citrate on the Nickel-coating Quality of Deformed Zinc Alloy |
| |
| KE Zhi-qin,WU Hao-jie and SONG Zhen-lun. Influence of pH and Content of Sodium Citrate on the Nickel-coating Quality of Deformed Zinc Alloy[J]. Surface Technology, 2010, 39(4): 18-20. DOI: 10.3969/j.issn.1001-3660.2010.04.006 |
| |
| Authors: | KE Zhi-qin WU Hao-jie SONG Zhen-lun |
| |
| Affiliation: | KE Zhi-qin,WU Hao-jie,SONG Zhen-lun(Ningbo Institute of Materials Technology , Engineering,Chinese Academy of Sciences,Ningbo 315201,China) |
| |
| Abstract: | After regulating the other technological parameter,changing the pH value and sodium citrate content,the ZAT10 deformed zinc alloy was electroplated with Ni.The morphology of nickel coating was recorded with optical microscopy,scanning electron microscopy(SEM-EDS) and ultra-depth three-dimensional microscopy.Based on the stability of electroplating solution and surface property,the test region was classified.And the schematic diagram of pH-sodium citrate content of electroplating solution vs stability of ele... |
| |
| Keywords: | ZAT10 deformed zinc alloy Ni electroplating pH value sodium citrate |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《表面技术》浏览原始摘要信息 |
|
点击此处可从《表面技术》下载全文 |
|
