| 搅拌摩擦加工Zr41Ti14Cu12.5Ni10Be22.5大块非晶的组织和性能 |
| |
| 引用本文： | 付瑞东,杨万彪,戚 力,马明臻.搅拌摩擦加工Zr41Ti14Cu12.5Ni10Be22.5大块非晶的组织和性能[J].稀有金属材料与工程,2011,40(7):1277-1281. |
| |
| 作者姓名： | 付瑞东 杨万彪 戚 力 马明臻 |
| |
| 作者单位： | 燕山大学,河北秦皇岛,066004 |
| |
| 基金项目： | 国家重点基础研究发展规划(“973”计划)(2006CB605201) |
| |
| 摘 要： | 研究了搅拌摩擦加工对Zr41Ti14Cu12.5Ni10Be22.5大块非晶的组织和性能影响规律。结果表明：搅拌摩擦加工后非晶合金没有发生晶化。室温下准静态压缩后，母材区﹑热影响区﹑搅拌区试样的抗压强度基本相当，但是搅拌区和热影响区的弹性模量明显提高，搅拌区和热影响区试样断裂前均出现锯齿流变现象，其断口呈现多重剪切特征，认为这与搅拌摩擦加工改变自由体积浓度和分布有关
|
| 关 键 词： | 大块非晶 搅拌摩擦加工 压缩变形 剪切带 自由体积 |
| 收稿时间： | 2010/7/14 0:00:00 |
Structures and Performances of Zr41Ti14Cu12.5Ni10Be22.5 Bulk Amorphous Alloy |
| |
| Fu Ruidong,Yang Wanbiao,Qi Li and Ma Mingzhen.Structures and Performances of Zr41Ti14Cu12.5Ni10Be22.5 Bulk Amorphous Alloy[J].Rare Metal Materials and Engineering,2011,40(7):1277-1281. |
| |
| Authors: | Fu Ruidong Yang Wanbiao Qi Li and Ma Mingzhen |
| |
| Affiliation: | Yanshan University, Qinhuangdao 066004, China |
| |
| Abstract: | The effects of friction stir processing on the structures and performances of Zr41Ti14Cu12.5Ni10Be22.5 bulk amorphous alloy were investigated. The results show that the microstructure of the stir zone exhibits amorphous state after friction stir processing. The strength of base metal, heat affecting zone (HAZ) and stir zone are almost similar under room temperature quasi static state compressing. However, the elastic modulus of the stir zone and the HAZ is increased markedly and the serration flow phenomena are found in the compressing curve of HAZ and stir zone before fracture. The fracture surface of stir zone and HAZ exhibit obvious multiple shear characters. It is considered that friction stir processing changes the concentration and distribution of freedom volume in stir zone and HAZ |
| |
| Keywords: | bulk amorphous alloy friction stir processing compression deformation shear band freedom volume |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《稀有金属材料与工程》浏览原始摘要信息 |
|
点击此处可从《稀有金属材料与工程》下载全文 |
