首页 | 本学科首页   官方微博 | 高级检索  
     

重载轮胎面内刚柔耦合动力学建模及振动传递特性分析
引用本文:刘志浩,高钦和,刘准,王旭.重载轮胎面内刚柔耦合动力学建模及振动传递特性分析[J].兵工学报,2018,39(2):224-233.
作者姓名:刘志浩  高钦和  刘准  王旭
作者单位:火箭军工程大学兵器发射理论与技术国家重点学科实验室,陕西西安,710025;火箭军工程大学兵器发射理论与技术国家重点学科实验室,陕西西安,710025;火箭军工程大学兵器发射理论与技术国家重点学科实验室,陕西西安,710025;火箭军工程大学兵器发射理论与技术国家重点学科实验室,陕西西安,710025
摘    要:针对重载子午轮胎扁平率接近1的特点,建立面内刚柔耦合模型并开展振动分析方法研究。提出重载轮胎面内胎体与胎侧耦合的试验模态测试与分析方法;考虑胎侧的惯性力和分段刚度,建立重载轮胎面内弹性基础柔性梁动力学模型;利用有限差分法,将面内耦合动力学方程离散化,建立基于轮胎几何、结构参数的三参数等效刚度重载轮胎面内刚柔耦合模型;基于试验和解析模态共振频率,利用遗传算法对重载轮胎结构参数辨识,建立重载轮胎面内刚柔耦合模型的传递函数解析模型。数值分析和试验验证结果表明:在0~300 Hz频率范围内,面内刚柔耦合模型可准确表征重载轮胎面内胎体和胎侧的耦合振动模态与传递特性;该建模与试验分析方法可将重载轮胎的分析频率由0~180 Hz扩展至300 Hz.

关 键 词:重载子午轮胎  面内刚柔耦合建模  传递特性  有限差分  试验模态分析
收稿时间:2017-06-05

In-plane Rigid-elastic Coupling Dynamic Modeling and Vibration Response Prediction of Heavy Duty Radial Tire
LIU Zhi-hao,GAO Qin-he,LIU Zhun,WANG Xu.In-plane Rigid-elastic Coupling Dynamic Modeling and Vibration Response Prediction of Heavy Duty Radial Tire[J].Acta Armamentarii,2018,39(2):224-233.
Authors:LIU Zhi-hao  GAO Qin-he  LIU Zhun  WANG Xu
Affiliation:(State Key Discipline Laboratory of Armament Launch Theory and Technology, Rocket Force University of Engineering, Xi'an 710025, Shaanxi, China)
Abstract:A rigid-elastic coupling model is established and the vibration analysis method is presented for researching the in-plane characteristic of heavy duty radial tire with aspect ratio of about 1.The experimental modal test and analysis methods of coupling between carcass and sidewall are proposed,and the coupled natural frequencies are analyzed with the normal pressure and fixed rim.The rigid-elastic coupling equation is modeled with the flexible beam on the foundation that the carcass is modeled as the Euler beam and the sidewall is regarded as the sub-sectional spring with lumped mass.The dynamics equation is dispersed using finite difference method,and three-parameters model is derived based on the geometrical and structural parameters.The structural parameters of tire are identified by the genetic algorithm based on the experimental modal parameter of heavy duty tire,and the higher order modal frequency is predicted using the analytic method.The analytical transfer functions between carcass and carcass,and carcass and sidewall are derived.Experimental and theoretical results show that the rigid-elastic coupling model can be used accurately to predict the transfer function and vibration feature of heavy duty tire within the frequency band of 300 Hz,compared with the method in which only the coupling of carcass and rim is considered,and is limited to 180 Hz.
Keywords:heavy loaded radial tire  in-plane rigid-elastic coupled modeling  transfer characteristic  finite  difference  experimental modal analysis  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《兵工学报》浏览原始摘要信息
点击此处可从《兵工学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号