| 半开式叶轮数控加工工艺分析 |
| |
| 引用本文： | 焦建斌,刘华明.半开式叶轮数控加工工艺分析[J].制造技术与机床,1995(6):15-17. |
| |
| 作者姓名： | 焦建斌 刘华明 |
| |
| 作者单位： | 哈尔滨工业大学 |
| |
| 摘 要： | 本文在分析叶轮型面几何特性的基础上，对半开式叶轮的几种加工方法进行了详细的分析，在此基础上提出了能加工出较高质量叶轮的一种理想的数控加工工艺。
|
| 关 键 词： | 叶轮 半开式叶轮 数控加工 金属切削 |
Analysis on Technological Processes for NC Machining of Semi-open Type Blade |
| |
| Jiao Jianbin,et al.Analysis on Technological Processes for NC Machining of Semi-open Type Blade[J].Manufacturing Technology & Machine Tool,1995(6):15-17. |
| |
| Authors: | Jiao Jianbin |
| |
| Abstract: | With application of the jig, load/unload of the workpieces can realized while the machine is running, in other words, without stoping of the machine,during small to middle shafts turning. There is no diameter accuracy requirement on the blanks. The workpieces are positioned axially and centered outside bythe jig, and a higher axial positioning accuracy can be gained. |
| |
| Keywords: | Centre Jig Automatic Lathe |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
