| 摆头力矩电动机夹紧机构设计及优化分析 |
| |
| 引用本文： | 蔡春刚,任志辉,冷磊,贺行健,杜长林.摆头力矩电动机夹紧机构设计及优化分析[J].制造技术与机床,2012(5):131-133. |
| |
| 作者姓名： | 蔡春刚 任志辉 冷磊 贺行健 杜长林 |
| |
| 作者单位： | 大连光洋科技工程有限公司,大连辽宁,116600 |
| |
| 摘 要： | 为了降低精密五轴铣床摆头中夹紧套的结构应力集中程度,采用Solidworks和ANSYS软件对其进行了结构优化设计.首先在Solidworks中创建未进行优化的建议模型,然后针对实际工况和使用条件对其进行分析优化,从而显著改善夹紧套的应力集中程度.
|
| 关 键 词： | 力矩电动机 夹紧套 应力分析 结构优化 |
The design and optimization analysis report of set head torque motor clamping mechanism |
| |
| CAI Chungang
,
REN Zhihui
,
LENG Lei
,
HE Xingjian
,
DU Changlin.The design and optimization analysis report of set head torque motor clamping mechanism[J].Manufacturing Technology & Machine Tool,2012(5):131-133. |
| |
| Authors: | CAI Chungang REN Zhihui LENG Lei HE Xingjian DU Changlin |
| |
| Affiliation: | (Dalian Guangyang Technology Engineering Co., Ltd., Dalian 116600, CHN) |
| |
| Abstract: | In order to reduce the stress concentration degree in precision 5-axis milling head clamping set, Solidworks and ANSYS software are used to optimization design the structure. Use Solidworks to build unoptimized design model firstly, then analyze it according to the actual condition and conditions of use to optimization, so that significantly improve the clamping set of stress concentration. |
| |
| Keywords: | Torque Motor Clamping Sets Stress Analysis Structure Optimization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
