FLOW-3D在薄壁圆筒类铸件压铸模拟中的应用 |
| |
引用本文: | 洪炜,江晓红.FLOW-3D在薄壁圆筒类铸件压铸模拟中的应用[J].模具制造,2013(10):65-67. |
| |
作者姓名: | 洪炜 江晓红 |
| |
作者单位: | 凤凰光学股份公司,江西上饶334000 |
| |
摘 要: | 采用Flow3D软件对薄壁圆筒类铸件压铸过程中铝液的填充过程进行模拟,采用最佳进浇方式减小铸件内部孔洞类缺陷,提高铸件的合格率.
|
关 键 词: | Flow3D 模拟 圆筒类 孔洞类缺陷 |
The Application of FLOW-3D in Thin Wall Cylinder Die-Casting Parts Die-Casting Simulation |
| |
Abstract: | The Flow3D software is adopted to thin wall cylinder parts die-casting process of aluminous liquid during the filling process was simulated, the best way to into the water the decreasing part inside hole defects, improve the qualified rate of parts. |
| |
Keywords: | Flow3D simulation cylinder type the hole defect |
本文献已被 维普 等数据库收录! |
|