| 用CAXA三维电子图板V2实现机座的造型和出图 |
| |
| 引用本文： | 关鼎,吴狄.用CAXA三维电子图板V2实现机座的造型和出图[J].沈阳工业大学学报,2004,26(5):485-487,505. |
| |
| 作者姓名： | 关鼎 吴狄 |
| |
| 作者单位： | 1. 沈阳工业大学,机械工程学院,辽宁,沈阳,110023
2. 沈阳工程学院,机械系,辽宁,沈阳,110036 |
| |
| 摘 要： | 研究利用CAXA三维电子图板V2绘图软件进行减速器机座的实体造型和工程图输出，找出绘图软件在机械设计应用中存在的不足，指出软件设计尚待解决的剖视图处理缺陷。以及二、三维图形相脱节等问题。
|
| 关 键 词： | CAXA三维电子图板V2软件 立体造型 工程图 |
| 文章编号： | 1000-1646(2004)05-0485-03 |
Achieving shape and drawing of machine by CAXA 3D electronic planning board |
| |
| GUAN Ding,WU Di.Achieving shape and drawing of machine by CAXA 3D electronic planning board[J].Journal of Shenyang University of Technology,2004,26(5):485-487,505. |
| |
| Authors: | GUAN Ding WU Di |
| |
| Affiliation: | GUAN Ding~1,WU Di~2 |
| |
| Abstract: | Achieves output of machine model and engineering drawing by CAXA 3D electronic planning board.Research the disadvantage of this software in the field of engineering design.Pointing out the questions to be solved such as the limitation of the sectional views,the disjunction of 2D and 3D drawing. |
| |
| Keywords: | CAXA 3D electronic planning board V2 Software 3D shaping engineering drawings |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
