| 基于结合面的龙门五面加工中心虚拟建模及静刚度研究 |
| |
| 引用本文： | 刘悦,王立平,关立文,刘景袆.基于结合面的龙门五面加工中心虚拟建模及静刚度研究[J].工具技术,2007,41(5):14-16,17. |
| |
| 作者姓名： | 刘悦 王立平 关立文 刘景袆 |
| |
| 作者单位： | 清华大学,100084,北京市 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| |
| 摘 要： | 静刚度是机床性能的重要指标,有必要在设计阶段对其进行预估。针对正在设计中的Linear MC6000型龙门五面加工中心机床,在CAD软件UGNX2.0环境中建立了其各部件及整机的三维实体模型。在有限元分析软件ABAQUS6.51环境中,用弹簧单元来模拟滑块与直线导轨的接触刚度,建立了机床的有限元模型,并对其静刚度进行了分析。
|
| 关 键 词： | 静刚度 实体建模 有限元分析 弹簧单元 |
| 修稿时间： | 2006-08 |
Study on Virtual Modeling and Static Rigidity of 5-faces Portal-type MC Based on Interface |
| |
| Liu Yue Wang Liping Guan Liwen et al.Study on Virtual Modeling and Static Rigidity of 5-faces Portal-type MC Based on Interface[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2007,41(5):14-16,17. |
| |
| Authors: | Liu Yue Wang Liping Guan Liwen |
| |
| Affiliation: | Liu Yue Wang Liping Guan Liwen et al |
| |
| Abstract: | The static rigidity is an important index of machine tool's performance, which should be forecasted in the planning phase. Based on UG NX 2.0 developing environment, the 3-D physical models for components and complete machine of Linear MC6000, a 5-faces portal-type MC in designing, were established. Based on ABAQUS 6.51 environment, the contacting rigidity between slide block and linear guideway was simulated with spring elements, the finite element model of the machine tool was set up, and the static rigidity of the machine tool was analyzed. |
| |
| Keywords: | static rigidity physical modeling finite element analysis spring dement |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
