首页 | 本学科首页   官方微博 | 高级检索  
     

一种增益可控音频前置放大器电路的设计
引用本文:潘文光,于云丰,马成炎,叶甜春.一种增益可控音频前置放大器电路的设计[J].微电子学,2010,40(2).
作者姓名:潘文光  于云丰  马成炎  叶甜春
作者单位:1. 中国科学院,微电子研究所,北京,100029
2. 杭州中科微电子有限公司,杭州,310053
基金项目:国家科技重大专项(2009ZX02304-003-1)
摘    要:设计了一种基于0.5μm CMOS工艺的增益可控音频前置放大器电路。该电路采用直流音量控制方式控制前置放大器的增益,进而实现整体音频放大器的音量控制。外部输入的直流模拟电压经过片内模数转换器转换成数字控制信号,控制前置放大器的输入电阻与反馈电阻的比值,从而实现前置放大器的增益控制。该放大器能够实现32档的音量控制范围,增益从-50 dB变化到25 dB,电路版图面积为1.2 mm×0.8 mm。

关 键 词:音频功率放大器  音量控制  前置放大器  

Design of Variable-Gain Pre-Amplifier Circuit for Audio Power Amplifier
PAN Wenguang,YU Yunfeng,MA Chengyan,YE Tianchun.Design of Variable-Gain Pre-Amplifier Circuit for Audio Power Amplifier[J].Microelectronics,2010,40(2).
Authors:PAN Wenguang  YU Yunfeng  MA Chengyan  YE Tianchun
Affiliation:1.Institute of Microelectronics/a>;The Chinese Academy of Sciences/a>;Beijing 100029/a>;P.R.China/a>;2.Hangzhou Zhongke Microelectronics Co./a>;Ltd./a>;Hangzhou 310053/a>;P.R.China
Abstract:A variable-gain pre-amplifier circuit for audio power amplifier was implemented in 0.5-μm CMOS process. In this circuit, DC volume control operation mode was adopted to control gain of the pre-amplifier, and by adjusting the gain of the pre-amplifier, volume of the whole audio power amplifier could be controlled. The input DC analog voltage signal was converted to digital control signals with an on-chip A/D converter, which was used to adjust ratio of feedback resistance to input resistance, thus realizing gain control of the pre-amplifier. The amplifier could offer a 32-step DC volume control from -50 dB to 25 dB. The circuit occupies a layout area of 1.2 mm×0.8 mm.
Keywords:Audio power amplifier  Volume control  Pre-amplifier  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号