| 立式空调机底盘注塑模设计 |
| |
| 引用本文： | 陈吉平,丁智平,赵先琼.立式空调机底盘注塑模设计[J].工程塑料应用,2005,33(6):52-55. |
| |
| 作者姓名： | 陈吉平 丁智平 赵先琼 |
| |
| 作者单位： | 株洲工学院机械工程学院,株洲,421008;中南大学机电工程学院,长沙,410083 |
| |
| 摘 要： | 分析了立式空调机底盘的工艺特点和工艺要求，说明了模具工作原理，着重阐述了模具的型腔布置、分型面选择、浇注系统、成型零部件、定距分型机构、侧向分型与抽芯机构、型腔锁块机构、型芯支承柱、顶出与复位机构及冷却系统的设计特点。试模结果表明，该模具结构合理、动作可靠，所成型的注塑件质量满足技术要求。
|
| 关 键 词： | 立式空调机底盘 注塑模 浇注系统 定距分型机构 侧抽芯机构 |
| 修稿时间： | 2005年4月1日 |
DESIGN OF INJECTION MOULD FOR UNDERPAN OF UPRIGHT AIR CONDITION |
| |
| CHEN Jiping,Ding Zhiping,Zhao Xianqiong.DESIGN OF INJECTION MOULD FOR UNDERPAN OF UPRIGHT AIR CONDITION[J].Engineering Plastics Application,2005,33(6):52-55. |
| |
| Authors: | CHEN Jiping Ding Zhiping Zhao Xianqiong |
| |
| Abstract: | The technical characteristics and requirements of the underpan part of upright air condition were analyzed. The working principle of the injection mould was stated. The design specialties of the cavity laying, apart face choosing, pouring system, molding parts, apart mechanism of fix distance, core-apart face and pulling mechanism, lock-piece mechanism of cavity, supporting pole of moving mould, ejector and return mechanism, cooling system were explained emphatically. The mould were proved to be reasonable structure, reliable in movement, and pleased in technical requirement of the part quality in trying mould. |
| |
| Keywords: | underpan of upright air condition injection mould pouring system apart mechanism of fix distance core-pulling mechanism |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
