|
|||||
|
|
| 多冲接触载荷下激光涂层零件失效的可靠性分析 | |
| 引用本文： | 傅戈雁,刘义伦,石世宏.多冲接触载荷下激光涂层零件失效的可靠性分析[J].热加工工艺,2004(7):8-10. |
| 作者姓名： | 傅戈雁 刘义伦 石世宏 |
| 作者单位： | 1. 中南大学,机电工程学院,湖南,长沙,410000;苏州大学,机电工程学院,江苏,苏州,215021 2. 中南大学,机电工程学院,湖南,长沙,410000 3. 苏州大学,机电工程学院,江苏,苏州,215021 |
| 基金项目： | 湖南省自然科学基金资助项目(02JJY2072) |
| 摘 要： | 制备了钴基、镍基和铁基三种自熔合金粉末激光熔覆涂层试件，在多次冲击疲劳试验机上进行了可靠性试验，获得了相应的P-S-N曲线；考察了不同涂层材料对试件多冲接触疲劳强度和可靠性寿命的影响。一般说来，有较高静机械强度的涂层也有较高的多冲接触疲劳强度。三种涂层相比,镍基涂层的抗多冲性能最好，钴基次之，铁基较差。 |
| 关 键 词： | 涂层 多冲接触 失效 |
| 文章编号： | 1001-3814(2004)07-0008-03 |
Reliability Analysis of Laser Cladding Layer Parts on Repeated Impact Load |
|
| FU Ge-yan.Reliability Analysis of Laser Cladding Layer Parts on Repeated Impact Load[J].Hot Working Technology,2004(7):8-10. | |
| Authors: | FU Ge-yan |
| Abstract: | The laser cladding layer workpieces with the autolyzed alloy powder of Co-base, Ni-base and Fe-base were made. By the reliability test in a fatigue test machine the relevant P-S-N curves was got and the effects of the different coat material on the fatigue intension and reliability life was studied. Ni-base coat has the best property of anti-repeated impact,Co-base is better,Fe-base is bad. |
| Keywords: | coat repeated impact invalidity |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |