Mineral admixtures in mortars: Effect of inert materials on short-term hydration

This work is the first part of an overall project the aim of which is the development of general mix design rules for concrete containing different kinds of mineral admixtures. The separation of the different physical effects responsible for the modification of cement hydration, when chemically inert quartz powders are used in mortars, is presented. The phenomenological approach, based on semi-adiabatic calorimetry, is only associated with first-order phenomena, and the study excludes the complex physicochemical details involved in the chemistry of cement. The results, obtained for a wide range of fineness (between 180 and 2000 m²/kg) and replacement rates (up to 75%), show that short-term degrees of hydration in mortars containing a chemically inert mineral admixture (quartz) are always higher than for a reference mortar. This study confirms that cement hydration is enhanced by inert mineral admixtures. The two main physical effects responsible for the modification of the hydration of cement are identified as the dilution effect and heterogeneous nucleation. The dilution effect of the cement is highlighted with a coarse mineral admixture. The heterogeneous nucleation effect, although it increases with fineness of mineral admixtures, presents an optimum depending on the replacement rate. In the following part of this work, these results will be used for the development of an empirical model allowing us to quantify both physical effects.