| Fenton试剂-MBR工艺处理环氧增塑剂化工废水的研究 |
| |
| 引用本文： | 游文婷,冯斐,许振良,吴李. Fenton试剂-MBR工艺处理环氧增塑剂化工废水的研究[J]. 净水技术, 2009, 28(3): 61-64 |
| |
| 作者姓名： | 游文婷 冯斐 许振良 吴李 |
| |
| 作者单位： | 华东理工大学化学工程研究所膜科学与工程研发中心,上海,200237 |
| |
| 摘 要： | 针对含有H2O2的环氧增塑剂化工废水,采用Fenton-膜生物反应器（MBR）工艺进行处理。研究了不同的Fe2＋的投加量和反应时间对Fenton试剂处理废水的影响,讨论了不同水力停留时间（HRT）和进水COD浓度对MBR处理废水效率的影响。由结果可得,当Fenton试剂中Fe2＋投加量1.1 g/L、反应时间3 h、MBR的HRT 30 h和MLSS 7000～8000 mg/L时为最佳操作条件。处理出水CODCr为150～250 mg/L,总COD去除率为94%。
|
| 关 键 词： | Fenton 试剂 膜生物反应器 环氧增塑剂 化工废水 运行参数 |
Study of Using Fenton Reagent-Membrane Bioreactor on the Epoxy Plasticizers Wastewater Treatment |
| |
| YOU Wen-ting,FONG Fei,XU Zhen-liang,WU Li. Study of Using Fenton Reagent-Membrane Bioreactor on the Epoxy Plasticizers Wastewater Treatment[J]. Water Purifcation Technology, 2009, 28(3): 61-64 |
| |
| Authors: | YOU Wen-ting FONG Fei XU Zhen-liang WU Li |
| |
| Affiliation: | (Membrane Science and Engineering R＆D Lab, Chemical Engineering Research Center, East China University of Science and Technology, Shanghai 200237, China) |
| |
| Abstract: | Using fenton reagent and membrane bioreactor （MBR） for the treatment of the epoxy plasticizers wastewater which contains H2O2. The effect of Fenton reagent treatment was studied by different dosage of Fe^2＋ and reaction time. Meanwhile, the efficiency of MBR treatment was discussed by regulating different hydraulic retention time （HRT） and influent COD concentration. The experimental results indicated that the conditions of 1.1 g/L Fe^2＋, 3 h reaction time, 30 h HRT and 7 000-8 000 mg/L MLSS were the optimum operation conditions. The effluent CODcr reached 150-250 mg/L and total removal rate could reach 94 %. |
| |
| Keywords: | Fenton reagent membrane bioreactor epoxy plasticizers chemical wastewater operation parameters |
| 本文献已被 维普 万方数据 等数据库收录！ |
