| 基于虚拟技术的压缩机曲轴系统动力学分析 |
| |
| 引用本文： | 刘成武,黄鼎键.基于虚拟技术的压缩机曲轴系统动力学分析[J].福建建筑高等专科学校学报,2009(6):599-604. |
| |
| 作者姓名： | 刘成武 黄鼎键 |
| |
| 作者单位： | 福建工程学院机电及自动化工程系,福建福州350108 |
| |
| 基金项目： | 福建省科技厅青年人才基金（2008F3002）;福建省教育厅科技项目（JA08165）;福建省自然科学基金（2009J01228） |
| |
| 摘 要： | 利用多刚体动力学方法建立了基于ADAMS软件平台的往复压缩机曲柄连杆机构动力学仿真分析模型。根据所建立的模型,对压缩机曲柄连杆机构的运动学、动力学特性进行了仿真。通过仿真计算,获得了压缩机各运动件（曲轴、活塞、连杆等）的运动学和动力学参数。根据仿真结果,确定了曲轴的3种特殊工况。
|
| 关 键 词： | 往复压缩机 曲柄连杆机构 多刚体动力学 仿真 |
Dynamic analysis of crank and connecting rod mechanism of reciprocating compressor based on virtual technology |
| |
| Liu Chengwu,Huang Dingjian.Dynamic analysis of crank and connecting rod mechanism of reciprocating compressor based on virtual technology[J].Journal of Fujian College of Architecture & C.E.,2009(6):599-604. |
| |
| Authors: | Liu Chengwu Huang Dingjian |
| |
| Affiliation: | (Electromechanical and Automation Engineering Department, Fujian University of Technology, Fuzhou 350108, China) |
| |
| Abstract: | Using multi-rigid-body system dynamic method,dynamic analysis model of the crank and connecting rod mechanism of reciprocating compressor was established based on ADAMS software platform.The kinematic and dynamic simulations of the crank and connecting rod mechanism were conducted.Kinematic and dynamic parameters of the moving parts of the compressor including crankshaft,pistons and connecting rods were obtained.Three special working conditions were determined. |
| |
| Keywords: | reciprocating compressor crank and connecting rod mechanism multi-rigid-body dynamics simulation |
| 本文献已被 维普 等数据库收录！ |
