| CAE技术在冲压工艺中的应用 |
| |
| 引用本文： | 张明扬. CAE技术在冲压工艺中的应用[J]. 模具工业, 2006, 32(8): 24-25 |
| |
| 作者姓名： | 张明扬 |
| |
| 作者单位： | 北汽福田潍坊模具厂,山东,潍坊,261206 |
| |
| 摘 要： | 简述了CAE技术在汽车覆盖件冲压工艺中的应用,通过对拉伸工序设置等效拉伸筋进行模拟分析,能够提前预知局部成形缺陷,并采取有效措施。实践证明,其分析缩短了模具制造周期,减少了模具试模次数。
|
| 关 键 词： | 冲压工艺 等效筋 调试 |
| 文章编号： | 1001-2168(2006)08-0024-02 |
| 收稿时间： | 2006-02-21 |
| 修稿时间： | 2006-02-21 |
Application of CAE technology in stamping process |
| |
| ZHANG Ming-yang. Application of CAE technology in stamping process[J]. Die & Mould Industry, 2006, 32(8): 24-25 |
| |
| Authors: | ZHANG Ming-yang |
| |
| Affiliation: | Weifang Die Factory of Beiqi Foton Motor Co., Ltd, Weifang, Shandong 261206, China |
| |
| Abstract: | The application of CAE technology in stamping process of automobile metal sheets was briefly introduced. By analyzing the installation of equivalent stretching rib in stretching procedure, partial defects were predicted and then effective measures could be taken. The application of the simulation analysis shortened the manufacturing cycle of die and reduced the frequency of trial produce. |
| |
| Keywords: | technological process equivalent rib trial produce |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
