| 充气天线初始构形的确定 |
| |
| 引用本文： | 付丽,杜星文,万志敏. 充气天线初始构形的确定[J]. 哈尔滨工业大学学报, 2008, 40(5): 714-716 |
| |
| 作者姓名： | 付丽 杜星文 万志敏 |
| |
| 作者单位： | 哈尔滨工业大学,复合材料与结构研究所,哈尔滨,150001,;哈尔滨工业大学,分析测试中心,哈尔滨,150001 |
| |
| 摘 要： | 充气天线的反射面是由柔性薄膜材料拼接而成的,针对其初始构形难以确定的问题,提出了反算法.首先利用公式计算出最优充气压力,对设计构形施加此压力,然后通过反算法得到初始构形,重复上述过程直到满足误差要求.算例结果表明:由此方法确定的初始构形在充气到给定压力后,与设计曲面的均方根误差满足天线结构设计允许的误差要求,从而能够满足天线电性能的要求.
|
| 关 键 词： | 充气天线 初始构形 形面精度 几何非线性 |
| 文章编号： | 0367-6234(2008)05-0714-03 |
| 修稿时间： | 2006-08-28 |
Determination of initial shape for inflatable antenna |
| |
| FU Li,DU Xing-wen,WAN Zhi-min. Determination of initial shape for inflatable antenna[J]. Journal of Harbin Institute of Technology, 2008, 40(5): 714-716 |
| |
| Authors: | FU Li DU Xing-wen WAN Zhi-min |
| |
| Affiliation: | 1.Center for Composite Materials and Structure,Harbin Institute of Technology,Harbin 15001,China;2.Center for Test and Analysis,Harbin Institute of Technology,Harbin 15001,China) |
| |
| Abstract: | The reflector of inflatable antenna is made of flexible membrane.Aiming at the difficulty of its initial shape determination,an inverse algorithm is presented.First,the optimum pressure was calculated and applied to the designed shape.Then the initial shape was obtained using the inverse algorithm.Iteration stoped until the error met the requirement.Result shows that the root mean square error meets the allowable precision requirement when the reflector was inflated to the given pressure.And the designed shape can also meet the requirement of the electricity performance of antenna. |
| |
| Keywords: | inflatable antenna initial shape surface precision geometry nonlinear |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
