| 基于ADS的平行耦合微带线带通滤波器的设计及优化 |
| |
| 引用本文： | 张福洪,张振强,马佳佳.基于ADS的平行耦合微带线带通滤波器的设计及优化[J].电子器件,2010,33(4). |
| |
| 作者姓名： | 张福洪 张振强 马佳佳 |
| |
| 作者单位： | 杭州电子科技大学通信工程学院,杭州,310018 |
| |
| 摘 要： | 介绍一种借助ADS(Advanced Design System)软件进行设计和优化平行耦合微带线带通滤波器的方法,给出了清晰的设计步骤,最后结合设计方法利用ADS给出一个中心频率为2.6 GHz,带宽为200 MHz的微带带通滤波器的设计及优化实例和仿真结果,并进一步给出电路版图Momentum仿真结果.仿真结果表明:这种方法是可行的,满足设计的要求.
|
| 关 键 词： | 平行耦合微带线 带通滤波器 设计 优化 |
Design and optimization of Parallel Coupled Microstrip lines band-pass filter Based on ADS |
| |
| ZHANG Fuhong,ZHANG Zhenqiang,MA Jiajia.Design and optimization of Parallel Coupled Microstrip lines band-pass filter Based on ADS[J].Journal of Electron Devices,2010,33(4). |
| |
| Authors: | ZHANG Fuhong ZHANG Zhenqiang MA Jiajia |
| |
| Affiliation: | ZHANG Fuhong,ZHANG Zhenqiang,MA Jiajia(School of Communication Engineering,Hangzhou Dianzi University,Hangzhou 310018,China) |
| |
| Abstract: | This paper introduces a methodology for design and optimination of the microstrip band-pass filter with the aid of ADS (Advanced Design System),and presents design steps.A center frequency of 2.6 GHz,bandwidth of 200 MHz microstrip band-pass filter is implemened,its optimization example and simulation results are given by the methodologic design method and ADS,and Momentum simulation results of the circuit layout are obtained.Simulation results meet the design requirements and show that this approach is fea... |
| |
| Keywords: | ADS |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《电子器件》浏览原始摘要信息 |
|
点击此处可从《电子器件》下载全文 |
|
