| 国产无压机分球式超高压装置用硬质合金顶锤的研究 |
| |
| 引用本文： | 彭文,彭伟,孔德方. 国产无压机分球式超高压装置用硬质合金顶锤的研究[J]. 金刚石与磨料磨具工程, 2016, 36(1): 50-56. DOI: 10.13394/j.cnki.jgszz.2016.1.0011 |
| |
| 作者姓名： | 彭文 彭伟 孔德方 |
| |
| 作者单位： | 1. 硬质合金国家重点实验室, 湖南 株洲 412000;2. 株洲硬质合金集团有限公司, 湖南 株洲 412000 |
| |
| 摘 要： | 介绍无压机分球式超高压装置（BARS——俄文的首字母БАРС=Беспрессовая Аппаратура высокого давления "Разрезная Сфера"）合成宝石级金刚石的基本原理，分析BARS装置用硬质合金顶锤的功能特性，论述国产BARS装置用硬质合金顶锤成功工业化应用的研究过程。研究表明:选用WC-Co细颗粒复合粉，并采用搅拌球磨、冷等静压压制和低压烧结等综合技术，能提高细晶粒材料的组织结构均匀性、抗压强度及弹性模量，满足顶锤高强度、高刚性的使用需求。同时，采用在磨削中互为基准的工艺方案，控制产品上下同轴线是自定位顶锤合理的加工方案；选用粒度号M22/36的砂轮做精磨砂轮，合理的进刀量是保证加工精度的关键。
|
| 关 键 词： | 无压机分球式超高压装置(BARS) 硬质合金顶锤 细晶粒 自定位 精度 |
Research on domestic BARS cemented carbide anvil |
| |
| PENG Wen,PENG Wei,KONG Defang. Research on domestic BARS cemented carbide anvil[J]. Diamond & Abrasives Engineering, 2016, 36(1): 50-56. DOI: 10.13394/j.cnki.jgszz.2016.1.0011 |
| |
| Authors: | PENG Wen PENG Wei KONG Defang |
| |
| Affiliation: | 1. State Key Laboratory of Cemented Carbide, Zhuzhou 412000, Hunan, China;2. Zhuzhou Cemented Carbide Group Corp., Ltd., Zhuzhou 412000, Hunan, China |
| |
| Abstract: | The basic principle of synthesizing of gem-grade diamond using pressless "split sphere" high-pressure apparatus(BARS)was introduced.The property of cemented carbide anvils placed in BARS was presented,as well as the industrializing process of Chinese cemented carbide for BARS.Research showed that using WC-Co ultrafine composite powder after stirring ball milling,cold isostatic pressing and low pressure sintering would increase the uniformity of organizational structure,together with compressive strength and elastic modulus of hard alloy.The optimum project to machine selflocalization anvil was to mutually act as reference and control product concentricity.Using M22/36 finishing wheel with a reasonable amount of feed in the grinding was the key to ensure the machining accuracy. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《金刚石与磨料磨具工程》浏览原始摘要信息 |
|
点击此处可从《金刚石与磨料磨具工程》下载全文 |
