| 砂轮表面形貌仿真方法研究 |
| |
| 引用本文： | 曹有为,乔国朝.砂轮表面形貌仿真方法研究[J].金刚石与磨料磨具工程,2016,36(3):33-37. |
| |
| 作者姓名： | 曹有为 乔国朝 |
| |
| 作者单位： | 1. 东北林业大学 机电工程学院, 哈尔滨 150040;2. 河北工业大学 机械工程学院, 天津 300130 |
| |
| 基金项目： | 中央高校基本科研业务费专项资金资助（DL13BB11） |
| |
| 摘 要： | 砂轮表面形貌对磨削加工过程和已加工表面质量有着极大影响，但由于砂轮表面磨粒分布的随机性，描述砂轮表面形貌非常困难。通过对砂轮表面进行采样和数据处理，运用统计学理论和Johnson变换方法获得了非正态分布砂轮表面形貌的数学描述方程，在此基础上对砂轮表面形貌进行仿真。选用伯明翰14参数集的部分参数作为评价标准，对测量的砂轮表面形貌和仿真形貌进行比较，结果显示:二者具有很好的一致性，6个参数的平均相对误差仅为2.97%。结果充分证明了该仿真方法的正确性。
|
| 关 键 词： | 非正态分布 表面形貌 砂轮 仿真 |
Simulation method of grinding wheel topography |
| |
| CAO Youwei,QIAO Guochao.Simulation method of grinding wheel topography[J].Diamond & Abrasives Engineering,2016,36(3):33-37. |
| |
| Authors: | CAO Youwei QIAO Guochao |
| |
| Affiliation: | 1. School of Mechanical and Electrical Engineering, Northeast Forestry University, Harbin 150040, China;2. School of Mechanical Engineering, Hebei University of Technology, Tianjin 300130, China |
| |
| Abstract: | Surface topography of grinding wheel has tremendous influence on grinding process and machined surface quality,but it is difficult to describe the surface topography of grinding wheel due to the randomness of abrasive grains distributed on grinding wheel surface.Through sampling and data processing for grinding wheel topography,the mathematical equation of grinding wheel topography are gained by combining statistical theory and Johnson transformation method,based on which the grinding wheel topography are simulated.Some parameters of Birmingham 14 are chosen to compare the measured topography and simulated topography.The results indicate that there is a good consistency between the two,while the average deviation of six parameters is only 2.97%.It verified the correctness of the simulation method adequately. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《金刚石与磨料磨具工程》浏览原始摘要信息 |
|
点击此处可从《金刚石与磨料磨具工程》下载全文 |
