首页 | 本学科首页   官方微博 | 高级检索  
     

漏磁检测的仿真和实验研究
引用本文:张玉良,阙沛文,黄作英,韩文花.漏磁检测的仿真和实验研究[J].传感器与微系统,2006,25(8):29-31.
作者姓名:张玉良  阙沛文  黄作英  韩文花
作者单位:上海交通大学,自动检测研究所,上海,200240
摘    要:根据检测得到漏磁信号重构出缺陷的外形轮廓,需要建立完整的缺陷模型数据库。首先,在搭建的漏磁信号的检测平台中,由上位机控制数采卡采集由霍尔传感器阵列转换得到的多通道漏磁信号,并实时显示采集到的缺陷信号。再通过有限元分析软件ANSYS对缺陷建模仿真,并计算分析出缺陷的磁力线分布。分析对比两组实验数据显示,两组数据吻合的很好,可以用ANSYS仿真的数据来建立数据库。

关 键 词:漏磁检测  霍尔传感器阵列  ANSYS有限元分析
文章编号:1000-9787(2006)08-0029-03
收稿时间:2006-03-28
修稿时间:2006年3月28日

Study on simulation and experiment of magnetic flux leakage
ZHANG Yu-liang,QUE Pei-wen,HUANG Zuo-ying,HAN Wen-hua.Study on simulation and experiment of magnetic flux leakage[J].Transducer and Microsystem Technology,2006,25(8):29-31.
Authors:ZHANG Yu-liang  QUE Pei-wen  HUANG Zuo-ying  HAN Wen-hua
Affiliation:Institute of Automatic Detection and Instruments, Shanghai Jiaotong University, Shanghai 200240, China
Abstract:In order to recover the defect profiles from measured signals,an entire database is needed to be founded.A workbench for inspection and measure magnetic flux leak(MFL) is built with the Hall sensor array.PC controls the data acquisition card to collect the data through multi-channels,meanwhile display the data wave on the screen.The ANSYS software is used to simulate the model of defect,then to calculate the distribution of magnetic line of force.The two groups of data are similar.So we can found the database by ANSYS software.
Keywords:electromagnetic nondestructive testing  Hall sensor array  ANSYS finite element method
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号