| 挖掘机铲斗强度分析 |
| |
| 引用本文： | 邓子龙,高财禄,付越. 挖掘机铲斗强度分析[J]. 辽宁石油化工大学学报, 2007, 27(4): 45-47,50 |
| |
| 作者姓名： | 邓子龙 高财禄 付越 |
| |
| 作者单位： | 辽宁石油化工大学机械工程学院,辽宁抚顺,113001;辽宁石油化工大学机械工程学院,辽宁抚顺,113001;辽宁石油化工大学机械工程学院,辽宁抚顺,113001 |
| |
| 摘 要： | 以WY100C 液压挖掘机(斗容量为1 m3)为样机, 对挖掘机反铲工作装置--- 铲斗应用Pro/ E 建立实体模型, 并应用Pro/M ECH ANICA 模块对挖掘机铲斗的设计模型在受最大应力的危险工况下进行有限元强度分析。分析结果表明, 挖掘机铲斗的前部斗齿、斗后壁耳板的根部、铰接处和补强区域是最危险的部分, 设计时应重点考虑其强度要求, 其它部分相对较安全。挖掘机反铲工作装置-铲斗的强度分析为铲斗的设计及改善铲斗的性能提供了理论依据。
|
| 关 键 词： | 液压挖掘机 Pro/E 铲斗 有限元分析 强度分析 |
| 文章编号： | 1672-6952（2007）01-0015-03 |
| 收稿时间： | 2007-07-21 |
| 修稿时间： | 2007-10-20 |
Intensity Analysis of the Excavator Bucket |
| |
| DENG Zi-long,GAO Cai-lu,FU Yue. Intensity Analysis of the Excavator Bucket[J]. Journal of Liaoning University of Petroleum & Chemical Technology, 2007, 27(4): 45-47,50 |
| |
| Authors: | DENG Zi-long GAO Cai-lu FU Yue |
| |
| Affiliation: | School of Mechanical Engineering , Liaoning University of Petroleum &Chemical Technology ,;Fushun Liaoning 113001 , P .R .China |
| |
| Abstract: | Taking WY100C hydraulic excavator(bucket capacity for 1 m3) as a prototype,a physical model of the excavator backhoe working device(bucket) was established by Pro/E.The finite element intensity analysis of the design model of the bucket was made under the circumstance of dangerous working condition of the largest stress through Pro/MECHANICA module.The results indicate that the bucket teeth in the front of the bucket,the roots of the bucket back lug,the hinge areas and the reinforcement areas are the most dangerous parts.Designers should especially take intensity requests of these locations into account.Other parts are relatively safe.The intensity analysis of the excavator backhoe working device(bucket) provides a theoretical basis not only for bucket design,but also for improving the performance of bucket. |
| |
| Keywords: | Hydraulic excavator Pro/E Bucket Finite element analysis Intensity analysis |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《辽宁石油化工大学学报》浏览原始摘要信息 |
|
点击此处可从《辽宁石油化工大学学报》下载全文 |
|
