| PVC塑料电镀铜的研究 |
| |
| 引用本文： | 李荣,余祖孝.PVC塑料电镀铜的研究[J].塑料科技,2007,35(11):76-79. |
| |
| 作者姓名： | 李荣 余祖孝 |
| |
| 作者单位： | 1. 重庆师范大学化学学院,重庆,400047
2. 四川理工学院材料与化学工程系,四川,自贡,643000 |
| |
| 摘 要： | 研究了工艺条件和添加剂对PVC塑料上电镀铜的沉积速度、硬度、结合力、耐蚀性、表面形貌等性能的影响。结果表明,PVC塑料上电镀铜的合理配方及工艺:CuSO4150g/L,H2SO440g/L,NaCl0.08g/L,0.015A/cm2,50℃,1.5h;较优单组分添加剂为:聚乙二醇-6000(50mg/L);最佳复合添加剂为:聚乙二醇-6000(50mg/L)+光亮剂OP-10(50mg/L)。
|
| 关 键 词： | 聚氯乙烯 电镀铜 电镀工艺 添加剂 |
| 文章编号： | 1005-3360(2007)11-0076-04 |
| 修稿时间： | 2007-07-04 |
Copper Electroplating on PVC Plastics |
| |
| Li Rong,Yu Zuxiao.Copper Electroplating on PVC Plastics[J].Plastics Science and Technology,2007,35(11):76-79. |
| |
| Authors: | Li Rong Yu Zuxiao |
| |
| Affiliation: | 1.College of Chemistry; Chongqing Normal University; Chongqing 400047; China ;2.Material and Chemical Engineering Department; Sichuan University of Science and Engineering; Zigong 643000; China |
| |
| Abstract: | Effects of process and additives on the deposition rate,hardness,adhesion strength,anti-corrosion properties and surface conformation of copper electroplating on PVC plastics were studied.The results show:the optimum formula and process:CuSO4 150g/L,H2SO4 40g/L,NaCl 0.08g/L,0.015 A/cm2,50℃,1.5h;the better single component additive:polyethylene glycol(PEG-6000)(50mg/L);the optimum compound additive:PEG-6000(50mg/L)+OP-10(50mg/L). |
| |
| Keywords: | PVC Copper electroplating Electroplating process Additive |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
