| 应用Moldflow软件优化哈夫模具结构设计 |
| |
| 引用本文： | 吴梦陵,张珑. 应用Moldflow软件优化哈夫模具结构设计[J]. 塑料科技, 2007, 35(11): 80-84 |
| |
| 作者姓名： | 吴梦陵 张珑 |
| |
| 作者单位： | 南京工程学院材料工程学院,江苏,南京,211167;南京工程学院材料工程学院,江苏,南京,211167 |
| |
| 摘 要： | 采用注塑CAE技术,利用Moldflow软件,对电热水壶塑料外壳的成型过程进行分析。结果表明:浇口数量及形式、温度、温度调节系统对塑件质量均有影响。根据上述影响因素,改进模具设计方案,找出最佳工艺参数分布范围,从而起到优化哈夫模具结构设计的作用。
|
| 关 键 词： | 注射模CAE Moldflow 优化 模具结构 |
| 文章编号： | 1005-3360(2007)11-0080-05 |
| 修稿时间： | 2007-09-03 |
Application of Moldflow to Optimum Design of Half Mould Construction |
| |
| Wu Mengling,Zhang Long. Application of Moldflow to Optimum Design of Half Mould Construction[J]. Plastics Science and Technology, 2007, 35(11): 80-84 |
| |
| Authors: | Wu Mengling Zhang Long |
| |
| Affiliation: | College of Material Engineering; Nanjing Institute of Technology; Nanjing 211167; China |
| |
| Abstract: | The moulding process of moulded part——electric heating thermos bottle's plastic shell was analyzed by injection mould CAE technology and Moldflow software.The result indicates that all of the gate number,gate form,temperature,and its controlling system affect the moulded part quality.According to the influencing factors mentioned above,the mould design was improved and the processing parameters were obtained that they played the role of the optimum design of half mold construction. |
| |
| Keywords: | Moldflow |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
