| 首饰工厂提高废料回收率的途径 |
| |
| 引用本文： | 袁军平,王昶,李佳,林健斐,刘锦华. 首饰工厂提高废料回收率的途径[J]. 宝石和宝石学杂志, 2008, 10(3) |
| |
| 作者姓名： | 袁军平 王昶 李佳 林健斐 刘锦华 |
| |
| 作者单位： | 1. 番禺职业技术学院珠宝学院,广东,广州,511483
2. 广州皇庭珠宝(国际)有限公司,广东,广州,511483 |
| |
| 基金项目： | 广州市番禺区科技计划项目资助课题成果(2007-Z-21-1) |
| |
| 摘 要： | 在首饰的制作过程中会产生大量的含贵金属废料，其回收状况直接决定首饰工厂的贵金属实际损耗量。根据首饰制作过程中各种废料形式的特点，提出在首饰工厂内建立齐全的废料收集与回收系统是提高废料回收率的重要途径之一，应主要从抽尘收集系统、废液沉淀系统、空气调节系统、化粪池和废料清扫5个方面设置该系统。
|
| 关 键 词： | 首饰制作 废料 回收 |
Way on Improving Recovery Rate of Scrap for Jewelry Factory |
| |
| YUAN Jun-ping,WANG Chang,LI Jia,LIN Jian-fei,LIU Jin-hua. Way on Improving Recovery Rate of Scrap for Jewelry Factory[J]. Journal of Gems & Gemmology, 2008, 10(3) |
| |
| Authors: | YUAN Jun-ping WANG Chang LI Jia LIN Jian-fei LIU Jin-hua |
| |
| Affiliation: | 1.Jewelry Institute of Panyu Polytechnic;Guangzhou 511483;China;2.Waddy Jewellery Co.Ltd.;China |
| |
| Abstract: | A large amount of the precious metal-bearing scrap are produced during the process of jewelry manufacturing,and the actual loss of the precious metal in jewelry factory could be directly decided by the recovery status of the scrap.According to the features of the scrap form it is considered that the complete collection and recovery systems for the scrap should be established in jewelry factory,which is one of the important ways to improve the recovery rate of the scrap.The collection and recovery system for... |
| |
| Keywords: | jewelry manufacture scrap recovery |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
