首页 | 本学科首页   官方微博 | 高级检索  
     

超细CaCO3/SBS复合材料的制备及性能研究
引用本文:程国君,于秀华,唐忠锋,徐初阳.超细CaCO3/SBS复合材料的制备及性能研究[J].材料导报,2011,25(10):106-109.
作者姓名:程国君  于秀华  唐忠锋  徐初阳
作者单位:1. 安徽理工大学材料科学与工程学院,淮南,232001
2. 广西工学院生物与化学工程系,柳州,545006
基金项目:安徽省优秀青年人才基金,2009年度安徽理工大学青年基金
摘    要:利用硅烷偶联剂对超细CaCO3进行表面改性,通过直接共混的方法制备了超细CaCO3/SBS复合材料。研究了复合材料的拉伸性能、硬度、耐热性的变化,并采用扫描电镜分析了复合材料拉伸断面的微观结构变化。结果表明,表面处理后超细CaCO3在SBS体系中能形成网状结构,材料的拉伸性能、硬度及耐热性能提高。当Ca-CO3含量为10%时能获得拉伸强度、断裂伸长率及耐热性能优异的复合材料。

关 键 词:超细CaCO3  SBS  拉伸强度  硬度  耐热性能

Properties and Preparation of Ultra-fine CaCO3/SBS Composites
CHENG Guojun,YU Xiuhua,TANG Zhongfeng,XU Chuyang.Properties and Preparation of Ultra-fine CaCO3/SBS Composites[J].Materials Review,2011,25(10):106-109.
Authors:CHENG Guojun  YU Xiuhua  TANG Zhongfeng  XU Chuyang
Affiliation:1(1 Institute of Material Science and Engineering,Anhui University of Science and Technology,Huainan 232001;2 Department of Biological and Chemical Engineering,Guangxi University of Technology,Liuzhou 545006)
Abstract:SBS/CaCO3 composite materials were prepared by direct blending methods after ultra-fine CaCO3 was modified by silane coupling agent.Tensile property,hardness and heat resistance property of composite materials were studied by various methods,meanwhile micro-structure changes of tensile fracture were observed by scanning electron microscopy.The results show that tensile properties,hardness and heat resistance of composites are increased due to the network structure of CaCO3 with SBS.The excellent tensile strength,elongation-at break and heat resis-tance of composites are obtained when filled content of modified CaCO3 is 10%.
Keywords:ultra fine CaCO3  SBS  tensile strength  hardness  heat resistance
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号