| 离合器罩盖冲压工艺与模具设计的改进 |
| |
| 引用本文： | 于云程,胡嘉鑫. 离合器罩盖冲压工艺与模具设计的改进[J]. 模具工业, 2013, 0(6): 35-37 |
| |
| 作者姓名： | 于云程 胡嘉鑫 |
| |
| 作者单位： | [1]常州信息职业技术学院,江苏常州213164 [2]江苏南方轴承股份有限公司,江苏常州213164 |
| |
| 摘 要： | 介绍了离合器罩盖原冲压工艺方案与模具结构设计,经分析后对原冲压工艺方案与模具结构作了改进,将落料拉深、冲孔、整形等冲压工序整合到一副复合模中,并设计了一副可以消除工序件定位误差的斜楔式侧向冲孔模。实践表明,改进后的冲压工艺与模具结构更加合理,提高了材料利用率和加工效率,降低了模具制造成本。
|
| 关 键 词： | 离合器罩盖 冲压工艺 复合模 侧向冲孔模 |
Stamping process of clutch shroud and improvement of its die |
| |
| YU Yun-cheng,HU Jia-xin. Stamping process of clutch shroud and improvement of its die[J]. Die & Mould Industry, 2013, 0(6): 35-37 |
| |
| Authors: | YU Yun-cheng HU Jia-xin |
| |
| Affiliation: | 1.Changzhou College of Information Technology, Changzhou, Jiangsu 213164, China; 2.Jiangsu Nanfang Bearing Co., Ltd., Changzhou, Jiangsu 213164, China) |
| |
| Abstract: | Through analyzing the stamping process scheme of a clutch shroud and the structure of its die, the process and the die were improved. The processes, such as blanking, drawing, punching and sizing, were implemented in a compound die, and a side punching die was designed to avoid the location deviation of the forming parts. |
| |
| Keywords: | clutch shroud stamping process compound die side punching die |
| 本文献已被 维普 等数据库收录！ |
|
