| 大切削具钻头回转钻进的分析 |
| |
| 引用本文： | 石永泉.大切削具钻头回转钻进的分析[J].探矿工程(岩土钻掘工程),1997(6):38-39,56. |
| |
| 作者姓名： | 石永泉 |
| |
| 作者单位： | 成都理工学院!成都，610059 |
| |
| 基金项目： | 成都理工学院科研基金!P09（10） |
| |
| 摘 要： | 根据刃具斜切入破岩的一些试验研究成果，分析了大切削具钻头的钻进过程，推导出了大切削具钻头进行回转钻进的机械钻速公式。
|
| 关 键 词： | 刃具 斜切入 大切削具钻头 机械钻速 |
Analysis of Rotary Drilling with Large Cutting Element Drill Bits |
| |
| Shi Yongquan.Analysis of Rotary Drilling with Large Cutting Element Drill Bits[J].Exploration Engineering:Rock & Soil Drilling and Tunneling,1997(6):38-39,56. |
| |
| Authors: | Shi Yongquan |
| |
| Affiliation: | Chengdu University of Technology Chengdu 610059 |
| |
| Abstract: | On the basis of experiment results from rock fragmentation by slantly penetrated cutting toolsthe drilling process of large cutting element drill bits is analysed and the penetration rate formulae for large cutting element drill bits in the case of rotary drilling is also derived. |
| |
| Keywords: | slant penetration cutting tool large cutting element drill bit penetration rate |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《探矿工程(岩土钻掘工程)》浏览原始摘要信息 |
|
点击此处可从《探矿工程(岩土钻掘工程)》下载全文 |
