| Q420B高强度铁塔角钢高温力学性能研究 |
| |
| 引用本文： | 胡杰,黄礼胜,陈其伟.Q420B高强度铁塔角钢高温力学性能研究[J].安徽工业大学学报,2013,30(1):21-24. |
| |
| 作者姓名： | 胡杰 黄礼胜 陈其伟 |
| |
| 作者单位： | 1. 马鞍山钢铁股份有限公司第二钢轧总厂,安徽马鞍山,243000
2. 安徽工业大学材料科学与工程学院,安徽马鞍山,243002 |
| |
| 摘 要： | 采用Gleeble-3500D对Q420B连铸坯试样进行热模拟实验,分析应变速率分别为1,5,10s-1时,温度对其高温力学性能的影响,并对高温脆性区间温度范围和脆化机理进行研究。结果表明,Q420B连铸坯在轧制过程中,抗拉强度随温度的升高而逐渐降低,在1150℃左右出现低塑性区。为了得到良好的面缩率,避免在热变形过程中形成裂纹等缺陷,建议轧制温度避开1150℃。
|
| 关 键 词： | Q420B 高温力学性能 连铸 脆性区 |
Study on High Temperature Mechanical Properties of Q420B High-strength Tower Angle Steel |
| |
| HU Jie
,
HUANG Lisheng
,
CHEN Qiwei.Study on High Temperature Mechanical Properties of Q420B High-strength Tower Angle Steel[J].Journal of Anhui University of Technology,2013,30(1):21-24. |
| |
| Authors: | HU Jie HUANG Lisheng CHEN Qiwei |
| |
| Affiliation: | 1. No. 2 Steelmaking and Rolling General Plant, Ma＇anshan Iron ＆ Steel Co. Ltd., Ma＇anshan 243000, China; 2. School of Materials Science and Engineering, Anhui University of Technology, Ma＇anshan 243002, China) |
| |
| Abstract: | Thermal simulation experiment of the continuous casting billet of Q420B steel was done by Gleeble 3500D hot simulator. Effect of temperature on high temperature mechanical properties at the strain rate of 1, 5, 10 s-1 was analyzed, high temperature brittleness temperature range and mechanism of embrittlement were also studied. Results show that, tensile strength with an increase of the temperature is gradually reduced, and there is a low plastic zone appears at 1 150 ℃ in the rolling process of Q420B continuous casting billet. In order to get a good surface shrinkage, to avoid the formation of cracks during hot deformation and other defects, the temperature of 1 150 ℃ should be avoided. |
| |
| Keywords: | Q420B high temperature mechanical properties continuous casting billet brittle zone |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
