| 闭挤式精冲变形区应力状态对断裂损伤的影响 |
| |
| 引用本文： | 邓明,王正立,吕琳.闭挤式精冲变形区应力状态对断裂损伤的影响[J].塑性工程学报,2011,18(1). |
| |
| 作者姓名： | 邓明 王正立 吕琳 |
| |
| 作者单位： | 重庆理工大学,材料科学与工程学院,重庆,400054 |
| |
| 基金项目： | 重庆市科技攻关计划资助项目(CSTC2010AC3086) |
| |
| 摘 要： | 文章将考虑静水应力、最大主应力及应变历史对材料损伤影响的Brozzo断裂准则模型,用于闭挤式精冲的断裂预测。分析了变形区材料的应力、应变状态对材料断裂损伤的影响,并通过DEFORM-2D有限元软件的模拟及物理试验进行验证。研究表明,Brozzo断裂准则能比较精确地模拟闭挤式精冲过程,模拟结果与试验误差在6%以内;主、副凹模闭合时,变形区材料所受的压应力越大,越有利于抑制裂纹的产生和扩展;精冲过程中,凸模刃口附近材料的压应力大于主凹模刃口附近材料,裂纹首先出现在主凹模刃口处,材料开始产生裂纹时的有效应变,随压应力的增加而增大。
|
| 关 键 词： | 精冲 韧性断裂 静水应力 精密成形 冲压 |
Influence of the stress state of deformation area on fracture damage during closed extruding fine-blanking |
| |
| DENG Ming,WANG Zheng-li,LV Lin.Influence of the stress state of deformation area on fracture damage during closed extruding fine-blanking[J].Journal of Plasticity Engineering,2011,18(1). |
| |
| Authors: | DENG Ming WANG Zheng-li LV Lin |
| |
| Affiliation: | DENG Ming WANG Zheng-li LV Lin(Chongqing University of Technology,Materials Science & Engineering College,Chongqing 400054 China) |
| |
| Abstract: | The Brozzo Fracture Criterion model considering the influence of hydrostatic stress,maximum principle stress and strain history on material fracture was applied to predict the fracture of closed extruding fine-blanking.The influence of the stress and strain state of deforming area on material fracture damage was analyzed,and validated through simulation by DEFORM-2D finite element software and physical experiments.The research shows that Brozzo Fracture Criterion can simulate the closed extruding fine-blank... |
| |
| Keywords: | fine-blanking ductile fracture hydrostatic stress precision forming blanking |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
