| 面向对象的三维参数化换热器管板的设计 |
| |
| 引用本文： | 李开世,黄文权,汪玉春.面向对象的三维参数化换热器管板的设计[J].四川轻化工学院学报,2010(6):723-726. |
| |
| 作者姓名： | 李开世 黄文权 汪玉春 |
| |
| 作者单位： | 四川理工学院机械工程学院,四川自贡643000 |
| |
| 基金项目： | 过程装备与控制工程四川省高校重点实验室项目（gk200805） |
| |
| 摘 要： | 以Pro／ENGINEER作为设计平台，利用其Pro／Toolkit模块，以VS．NET为平台开发动态链接库应用软件，通过菜单方式与Pro／ENGINEER集成。将MathCAD软件与Pro／ENGINEER集成实现复杂计算，并进行参数交互，最后再生模型，实现换热器管板的参数化设计。
|
| 关 键 词： | Pro／Toolkit 二次开发 换热器管板 |
3D Heat Transfer Tubeplate Parametric Design Based on the Object-oriented Method |
| |
| LI Kai-shi,HUANG Wen-quan,WANG Yu-chun.3D Heat Transfer Tubeplate Parametric Design Based on the Object-oriented Method[J].Journal of Sichuan Institute of Light Industry and Chemical Technology,2010(6):723-726. |
| |
| Authors: | LI Kai-shi HUANG Wen-quan WANG Yu-chun |
| |
| Affiliation: | (School of Mechanical Engineering, Sichuan University of Science ＆ Engineering, Zigong 643000, China) |
| |
| Abstract: | Based on Pro/ENGINEER, the method of establishing tubeplate of tubular heat transfer standard modeling by the interactive means were discussed. VS. NET combined with Pro/Toolkit are used as the tool and Dynamic-Link Library application software is realized. Complicated computing was realized by itegration of MathCAD software and Pro/ENGINEER, and regeneration of the model can be realized,the re-develop system of tubular heat transfer tubeplate parametric design is realized. |
| |
| Keywords: | Pro/Toolkit re-develop tubeplate |
| 本文献已被 维普 等数据库收录！ |
