| 高风温热风炉结构探讨 |
| |
| 引用本文： | 刘光明,贾彦忠.高风温热风炉结构探讨[J].江西冶金,2007,27(1):15-17,40. |
| |
| 作者姓名： | 刘光明 贾彦忠 |
| |
| 作者单位： | 1. 北京科技大学,北京,100083;新余钢铁有限责任公司,江西,新余,338001
2. 新余钢铁有限责任公司,江西,新余,338001 |
| |
| 摘 要： | 提高热风温度是高炉增加喷煤量和降低燃料比的重要措施.本文着重探讨了为提高热风炉风温水平,应采取的合理热风炉结构,在高温区采用硅砖及纠正热风管道系统存在的问题.
|
| 关 键 词： | 热风炉 高风温 结构 高风温热风炉 结构探讨 Temperature Hot Blast Stove High Configuration 问题 存在 管道系统 硅砖 高温区 水平 低燃料比 喷煤量 高炉 提高热风温度 |
| 文章编号： | 1006-2777（2007）01-0015-03 |
| 修稿时间： | 2006-06-30 |
Study on Configuration in Hot Blast Stove with High Blast Temperature |
| |
| LIU Guang-ming,JIA Yan-zhong.Study on Configuration in Hot Blast Stove with High Blast Temperature[J].Jiangxi Metalllurgy,2007,27(1):15-17,40. |
| |
| Authors: | LIU Guang-ming JIA Yan-zhong |
| |
| Affiliation: | 1. Beijing University of Science and Technology, Beijing 100083;, China 2. Xinyu Iron and Steel Co. , Ltd. ,Jiangxi Xinyu 338001 ,China |
| |
| Abstract: | Increasing the temperature of hot blast is an important measure for higher coal rate and lower fuel rate of blast furnace. To improve the blast temperature of hot blast stove, the correct configuration in hot blast stove should been used, the siliceous bricks have been used in the high-temperature area and the problems occurred in the hot-blast main have been solved. The situations mentioned above are also described in this paper. |
| |
| Keywords: | hot blast stove high blast temperature configuration |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
