A compact asymmetric slot dual band antenna fed by CPW for PCS and UWB applications |
| |
| Authors: | Raj Kumar Praveen Naidu V Vivek Kamble |
| |
| Affiliation: | 1. Department of AE, ARDE, Pashan, Pune, India;2. Department of Electronics & Telecommunication Engineering, Research Scholar, Center for Radio Science Lab, Symbiosis International University, Pune, India;3. Department of Applied Physics, DIAT(Deemed University), Girinagar, Pune, India |
| |
| Abstract: | A compact slot antenna with an overall dimension of 30 × 30 × 1.6 mm3 is proposed for dual band applications. The radiating element is a hexagonal shape patch which protrudes from a Co‐Planar Waveguide (CPW) feed into a step shape slot. The slot is basically rectangular in shape and is extended by inserting rectangular cuts of different sizes on the ground plane around it. The ultrawide impedance bandwidth is achieved using asymmetric feed line along with extended rectangular cuts around the slot. For realizing the second band for personal communication system applications (near 1.9 GHz), a metallic stub of quarter wave length is attached at the top of the slot. The measured impedance bandwidth (for S11 < ?10 dB) is 110 MHz (1.86–1.97 GHz) for the first band and 9 GHz (3.0–12.0 GHz) for the second band. The antenna is further characterized by omnidirectional radiation patterns in the H‐plane, dumb‐bell shape radiation patterns in the E‐plane and a peak gain of 3–5 dBi over the ultrawideband. All the measured results are found to be in good agreement with the simulated results. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:243–254, 2015. |
| |
| Keywords: | dual‐band antenna CPW‐fed ultrawideband antenna |
|
|
