|
|||||
|
|
The readout method for wire chambers |
|
| Affiliation: | 1. University of Florence, Department of Physics, Via Sansone 1, 50019 Sesto Fiorentino, Italy;2. INFN Firenze, Via B. Rossi 1, 50019 Sesto Fiorentino, Italy;3. INO-CNR Firenze, Largo E. Fermi 6, 50125 Firenze, Italy;4. Smart Materials-Nanophysics, Istituto Italiano di Tecnologia, Genova, Via Morego 30, 16163 Genova, Italy;5. Joseph Stefan Institute, Jamova Cesta 39, 1000 Ljubljana, Slovenia;6. LENS Firenze, Via N. Carrara 1, 50019 Sesto Fiorentino, Italy;7. INFN Perugia, Perugia, Italy;8. Università degli Studi di Perugia, Dipartimento di Ingegneria, via G. Duranti 93, 06125 Perugia, Italy |
| Abstract: | The method for readout of information from a wire chamber through a conventional conductive wire cathode is tested to study the possibility of its practical usage. It is observed that the value of the signal induced on an external readout electrode depends on the detector geometry and makes up approximately 5–10% of the anode signal value. The application of this method should permit one to separate a detector into an active device and an independent readout system as well as to make the readout system more flexible and to improve detector coordinate properties. |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ | |