Reconfigurable filter bank structures for low complexity digital channelizer using fractional interpolation and MFIR filters with cosine modulation

A low complexity digital reconfigurable filter bank structure which is suitable for digital channelizers in software defined radio is proposed in this paper. In order to get a sharp transition width with low hardware complexity, multiplicative finite impulse response (MFIR) filter is used as the prototype filter in the proposed structure. A masking stage and a channel generation stage constitute the two stages of the proposed structure. In the masking stage, 5 sub-bands are generated by performing cosine modulation technique on the prototype filter. In the channel generation stage, different channels are generated by doing spectral addition/subtraction operations on the interpolated versions of the MFIR filter. Hence, the basic techniques used in the proposed structure are, cosine modulation and fractional interpolation technique. By adjusting a 3-bit control signal, different regions and channels, generated by the two stages, can be obtained. The proposed structure has a hardware complexity, which is much lesser than that of the state-of-the art techniques used for SDR channelizers. The number of channels generated using the proposed structure is also more. The main advantage of the proposed structure is that the hardware complexity of the proposed structure remains the same even if the number of channels is increased.