首页 | 本学科首页   官方微博 | 高级检索  
     

过氧化甲乙酮的合成
引用本文:刘琳,纪萍,沈德芬.过氧化甲乙酮的合成[J].辽宁石油化工大学学报,1999,19(1).
作者姓名:刘琳  纪萍  沈德芬
作者单位:1. 抚顺石油学院石化系,辽宁,抚顺,113006
2. 抚顺大学化学系,辽宁,抚顺,113001
3. 辽宁工程技术学校,辽宁,沈阳,110003
摘    要:在固体酸催化作用下,邻苯二甲酸二甲酯作稀释剂,由50%的双氧水和甲乙酮作用制取过氧化甲乙酮。考察了原料配比、固体酸用量、反应温度、搅拌时间对反应产率、活性氧含量和胶凝时间的影响,确定了较佳的工艺条件为:n(双氧水):n(丁酮)=1.5:1,固体酸催化剂用量占总重量的5‰,稀释剂的质量分数为50%左右,反应温度10℃,搅拌时间30min。产品活性氧含量高,稳定性好。

关 键 词:固体酸催化剂  合成  过氧化甲乙酮  固化

Synthesis of Methyl Ethyl Ketone Peroxide
Liu Lin,Ji Ping,Shen Defen.Synthesis of Methyl Ethyl Ketone Peroxide[J].Journal of Liaoning University of Petroleum & Chemical Technology,1999,19(1).
Authors:Liu Lin  Ji Ping  Shen Defen
Abstract:The synthesis of methyl ethyl ketone peroxide with catalysts of solid acid and phthalic acid phthalic ester as dilulent, 50% hydrogen peroxide and methyl ethyl ketone as reactions has been done. The influences of the raw material ratio, the amout of solid acid, reaction temperature, stirring time on the reaction yield, content of activity oxygen and gel time were studied. The optimum reaction conditions were: n (H 2O 2): n (MeCOEt)=1.5:1, solid acid content (total weight) is 5‰, content of dilulent is 50%, reaction temperature is 10℃, stirring time is 30 min. The content of activity oxygen is more and the stability is high.
Keywords:Solid acid catalyst  Synthesis  Methyl ethyl ketone peroxide  Solidification  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号