Fabrication of transparent conductive films with a sandwich structure composed of ITO/Cu/ITO

New transparent conductive films that had a sandwich structure composed of ITO/Cu/ITO multilayer films were prepared by a conventional RF and DC magnetron sputtering process on a polycarbonate substrate without intentional substrate heating. The thickness of each layer in the ITO/Cu/ITO films was kept constant at 50 nm/5 nm/45 nm. The optoelectrical and structural properties of the films were compared with conventional ITO single-layer films and ITO/Cu/ITO multilayered films. Although both films had identical thickness, 100 nm, the ITO/Cu/ITO films showed a lower resistivity, 3.5 × 10⁻⁴ Ω cm. In optical transmittance measurements, however, the ITO single-layer films showed a higher transmittance of 74% in the wavelength range of 300-800 nm. XRD spectra showed that both the ITO and ITO/Cu/ITO films were amorphous. The figure of merit, φ_TC, reached a maximum of 5.2 × 10⁻⁴ Ω⁻¹ for the ITO/Cu/ITO films, which was higher than the φ_TC of the ITO films (1.6 × 10⁻⁴ Ω⁻¹). The φ_TC results suggested that ITO/Cu/ITO films had better optoelectrical properties than conventional ITO single-layer films.