首页 | 本学科首页   官方微博 | 高级检索  
     

糠醛加氢制2-甲基呋喃超细催化剂的制备及反应性能
引用本文:吴静,申延明,张东,张雅静,刘长厚,张振祥.糠醛加氢制2-甲基呋喃超细催化剂的制备及反应性能[J].天然气化工,2003,28(3):4-8.
作者姓名:吴静  申延明  张东  张雅静  刘长厚  张振祥
作者单位:1. 大连理工大学化工学院,大连,116012;沈阳化工学院化学工程学院,沈阳,110142
2. 沈阳化工学院化学工程学院,沈阳,110142
3. 大连理工大学化工学院,大连,116012
基金项目:辽宁省自然科学基金项目(981 0 3 0 1 3 0 1 ),辽宁省教委计划科研项目 (2 0 0 1 2 0 65)
摘    要:以工业硅溶胶为硅源,采用溶胶-凝胶法制备CuO-CaO/SiO2超细催化剂。通过TEM、BET、XRD等测试技术分析了制备条件对催化剂结构的影响,并通过改变反应条件考察了催化剂的糠醛加氢制2-甲基呋喃反应性能。结果表明,以1 0mol/L的Na2CO3溶液为絮凝剂,在中性溶液中凝结溶有活性组分硝酸盐的硅溶胶,不但可以制得粒度较均匀的超细硅凝胶载体,同时可使活性组分以纳米级难溶盐的形式均匀分布于载体内。催化剂具有优良的催化性能和热稳定性,适宜的反应条件为:温度210~230℃,n(H2)/n(醛)=5~6,空速200~300h-1。

关 键 词:溶胶-凝胶  超细催化剂  糠醛加氢  2-甲基呋喃
文章编号:1001-9219(2003)03-04-05
修稿时间:2003年2月17日

Preparation and Reaction Performance of Ultrafine Catalysts for Hydrogenation of furfural to 2-methylfuran
Abstract:CuO CaO/SiO2 ultrafine catalysts were prepared using colloidal silica as silicon source by sol gel method The influence of preparing conditions on the structure of catalysts was investigated with TEM,BET and XRD techniques The performance of catalysts for hydrogenation of furfural to 2 methylfuran was discussed The experimental results show that not only ultrafine silica gel are received, but also active component is well dispersed in nanometer size Besides, the catalysts have better reaction performance and thermostability The proper reaction conditions are reaction temperature 220~230℃, molecular ratio of H2 to furfural 5~6 and space velocity 200~300 h-1
Keywords:sol-gel  ultrafine catalysts  hydrogenation of furfural  2-methylfuran
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号