| 碳化钛抗裂堆焊焊条的研制 |
| |
| 引用本文： | 邹勇,邹增大.碳化钛抗裂堆焊焊条的研制[J].中国机械工程,1996,7(3):99-100. |
| |
| 作者姓名： | 邹勇 邹增大 |
| |
| 作者单位： | 山东工业大学 |
| |
| 摘 要： | 采用Ｈ０８Ａ焊芯，Ｆｅ－Ｔｉ、ＴｉＯ２、石墨等药皮组分，通过电弧冶金反应，成功地在堆焊层中沉淀出ＴｉＣ等超硬质点，使堆焊层具有很高的耐磨性，突出的抗裂性，工艺性能良好，价格便宜，是堆焊焊条类型的新突破。
|
| 关 键 词： | 堆焊 碳化钛 制造 焊条 |
A Study on Titanium Carbide Surfacing Electrode for Crack Resistance |
| |
| Zou Yong et al..A Study on Titanium Carbide Surfacing Electrode for Crack Resistance[J].China Mechanical Engineering,1996,7(3):99-100. |
| |
| Authors: | Zou Yong |
| |
| Abstract: | In this study, H08A core wire and coating of electrode consisted of ferrotitfinium,titania, graphite etc were uzed, TiC super-hard particle was precipitated successfully in deposited metal by arc metallurgy reaction. Because titanium carbide have high hardness, tiny grain,well-distributed and other characteristics , so the layer of surfacing have very high wereability,outstanding crack resistance, and this hardfacing eletrode has a good usability and lower price. It is a new breakthrough about hardfacing electrode. |
| |
| Keywords: | surfacing electrode titanium carbide wear resistance super-hard particle |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
